Jump to content

Welcome to ExtremeHW

Welcome to ExtremeHW, register to take part in our community, don't worry this is a simple FREE process that requires minimal information for you to signup.

 

Registered users can: 

  • Start new topics and reply to others.
  • Show off your PC using our Rig Creator feature.
  • Subscribe to topics and forums to get updates.
  • Get your own profile page to customize.
  • Send personal messages to other members.
  • Take advantage of site exclusive features.
  • Upgrade to Premium to unlock additional sites features.
IGNORED

[Sponsored] InWin 103 build/Mod by Duality92


Duality92

Recommended Posts

I did a few modding experiences lately, namely plastidipping a motherboard along with paint hydro dipping, I wanted to gain knowledge regarding these two modding techniques. I say both went VERY well! The only downside, is that I'm not sure where or how, but the motherboard LEDs do not work anymore appart from the I/O shield which stays purple. I'll eventually be tearing the whole thing down again and reassembling the motherboard to make sure everything is connected as it should.

 

Anyways, I learned a lot on this project and I think the results are still quite good! I had to mod this InWin USA 103 to fit an Alphacool English UT60 360 in Push/Pull! (110mm total thickness!). There was a bracket up top which needed a lot of trimming since it holds both the dual hard drive bay along with the I/O ports so I could not just remove it!

 

Intel i9 9900K

AORUS Z390 Xtreme

TeamGroup Dark Z 3200 MHz

GIGABYTE RTX 2070 Super OC

Seasonic Prime Ultra Titanium 850W

CableMod Custom Pro ModMesh cables

Alphacool Watercooling all around (except water block)

Watercool HeatKiller Acetal Nicklet waterblock

Apacer Global Z280 256GB NVME SSD

 

 

rxSWjH.jpg

LZgguY.jpg

NdISwU.jpg

WaiEO9.jpg

D1Wvdi.jpg

XhCyze.jpg

pZCBPq.jpg

jN0M2K.jpg

0PQLWZ.jpg

3SjOKi.jpg

1RN1P8.jpg

1TKy5Q.jpg

PcAsRM.jpg

SbcWw2.jpg

Bu6IrN.jpg

  • Thanks 2
Link to comment
Share on other sites

@Duality92 Nice, is hydro dipping/plastidipping an expensive mod to undertake ? I assume you bought the kit and did it at home ?

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro Gen 5 2TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: Samsung 1TB 980 NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

 

 

This is literally just water, in a bucket, with spray paint on top and dipped the thing right in it.

 

IqUgOr.jpg

0yrfQh.jpg

HkhbQi.jpg

RbnrTp.jpg

rx5Ul5.jpg

uspOrz.jpg

s86LSR.jpg

nvW0j6.jpg

q8ySwE.jpg

aQsQEu.jpg

m0Ssll.jpg

R4rPlu.jpg

nJjQhK.jpg

X5vyvV.jpg

pNVpTD.jpg

miJ4RV.jpg

WRSLEd.jpg

iXUKz1.jpg

neA10n.jpg

maO9ar.jpg

q8XLP1.jpg

0DdSry.jpg

pAbCXe.jpg

1LjgY6.jpg

SaQDmf.jpg

BYEaoU.jpg

UJXt5X.jpg

 

 

 

 

I consider myself educated. I always though it was a more chemical intensive progress, may give it a blast sometimes. Great pics btw !

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro Gen 5 2TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: Samsung 1TB 980 NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

  • 2 weeks later...

Subbed :wheee:

$3818.71

Owned

 Share

CPU: i7-10700
CPU COOLER: be quiet! Pure Rock Slim
MOTHERBOARD: Asus ROG STRIX B460-I GAMING
RAM: Kingston Fury 2x8GB 15-16-16-32
SSD/NVME: Samsung 950 Pro 512GB
SSD/NVME 2: Samsung 970 Evo 1TB
GPU: Gigabyte RTX 2070 Mini ITX
CASE: Lian Li PC-TU100 (Modded)
Full Rig Info
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy