Jump to content

Welcome to ExtremeHW

Welcome to ExtremeHW, register to take part in our community, don't worry this is a simple FREE process that requires minimal information for you to signup.

 

Registered users can: 

  • Start new topics and reply to others.
  • Show off your PC using our Rig Creator feature.
  • Subscribe to topics and forums to get updates.
  • Get your own profile page to customize.
  • Send personal messages to other members.
  • Take advantage of site exclusive features.
  • Upgrade to Premium to unlock additional sites features.
IGNORED

Post Your Last Print


Recommended Posts

Not sure how many folks here have a 3D printer, but I imagine there must be a few. Currently printing something very uninteresting on my Ender 3, but I'll take a pic and post it with an explanation when it finishes in another day or two.

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

  • 3 months later...

Alright so it's been a hot minute and not only did I forget about this thread, but I also went idle with my printer for a few months. Got back up and running last week and I'm having some annoying issues. Almost seems like my bed is warped; either my bed is too close to the extruder in the center and has good adhesion in the surrounding area, or the first few layers aren't squished in the center but the first two or three layers a little bit outside of that don't stick.

 

Any new 3D printers join EHW with the recent influx of members? Suggestions?

 

I did successfully print Leia's blaster for a friend as a Halloween costume prop but never got a picture of it before I gave it to her. :doh:

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

Wish I was in a position to comment, I still have not delved into 3D Printers, I know @Steven has with some nice success !

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro Gen 5 2TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: Samsung 1TB 980 NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

Here's my latest print.  My transmitter was delivered today and I got it running for the first time......and it's already covered in dog hair. ?

 

It was printed in mostly Atomic Filament CF-PETG with some parts being Colorfabb XF-CF20.  I still need a parallel cable so I can hook up both batteries.

 

PXL_20201103_235826473.thumb.jpg.15c00286f00dbcb6bc9b585bbbdae310.jpg

  • Thanks 4
  • Respect 1
Link to comment
Share on other sites

14 hours ago, Diffident said:

Here's my latest print.  My transmitter was delivered today and I got it running for the first time......and it's already covered in dog hair. ?

 

It was printed in mostly Atomic Filament CF-PETG with some parts being Colorfabb XF-CF20.  I still need a parallel cable so I can hook up both batteries.

 

PXL_20201103_235826473.thumb.jpg.15c00286f00dbcb6bc9b585bbbdae310.jpg

 

Sweet! I'd love to do a printed RC car eventually. I'd have a great time trying to design custom parts, only to realize they probably aren't as good haha. How much did the electronics cost you for a fully functioning car?

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

That's pretty awesome @Diffident!
I would love to be able to 3d print whatever I need, maybe some day.. :classic_smile:

Owned

 Share

CPU: Intel Core i9 13900KF
MOTHERBOARD: ASUS ROG MAXIMUS Z690 HERO
RAM: G.SKILL Trident Z5 6400CL30-38-38-28
PSU: Corsair AX1600i
GPU: Galax 4090 Hall Of Fame OCLabs Edition
Full Rig Info
Link to comment
Share on other sites

1 hour ago, Bastiaan_NL said:

That's pretty awesome @Diffident!
I would love to be able to 3d print whatever I need, maybe some day.. :classic_smile:

 

Barrier for entry into 3D printing is actually pretty low in the grand scheme of things. The Ender 3 is typically the go-to budget/entry-level printer and it goes for $200-250. Very capable, healthy print volume, but it just doesn't have an "luxury" features to keep it simple. And in some ways, you could argue that's a good thing, as it forces you to learn to do some things manually from the start.

 

Really easy to learn how to set up, but if you want to make your own designs, getting CAD sorted is another story. If you're familiar with CAD though and have some software at your disposal, you can just save as an .stl and you're good to go, extremely simple.

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

7 hours ago, Supercrumpet said:

 

Sweet! I'd love to do a printed RC car eventually. I'd have a great time trying to design custom parts, only to realize they probably aren't as good haha. How much did the electronics cost you for a fully functioning car?

I'm not sure how much.  I'm guessing I could have bought an RC car for less than what it cost to print one.  I know i spent over $100 on packs of different size screws from McMaster-Carr.  I started printing 3 different ones so I went through about 3 rolls of filament and the filament I used isn't cheap.  Plus I have a bunch of left over bearings and other parts. 

 

I have a Prusa i3 MK3S that I upgraded with a Bondtech extruder and a Slice Engineering Mosquito hot end. 

 

 

  • Thanks 2
Link to comment
Share on other sites

15 hours ago, Diffident said:

I'm not sure how much.  I'm guessing I could have bought an RC car for less than what it cost to print one.  I know i spent over $100 on packs of different size screws from McMaster-Carr.  I started printing 3 different ones so I went through about 3 rolls of filament and the filament I used isn't cheap.  Plus I have a bunch of left over bearings and other parts. 

 

I have a Prusa i3 MK3S that I upgraded with a Bondtech extruder and a Slice Engineering Mosquito hot end. 

 

 

 

Interesting, thanks for the info. That's good stuff to take into consideration.

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

On 11/4/2020 at 12:03 AM, Diffident said:

Here's my latest print.  My transmitter was delivered today and I got it running for the first time......and it's already covered in dog hair. ?

 

It was printed in mostly Atomic Filament CF-PETG with some parts being Colorfabb XF-CF20.  I still need a parallel cable so I can hook up both batteries.

 

PXL_20201103_235826473.thumb.jpg.15c00286f00dbcb6bc9b585bbbdae310.jpg

That is awesome, one day I will get a 3D printer but haven't as my personal use cases would be minimal. I do have CAD sorted (SOLIDWORKS man here) lol. Should charge for freelancing :p

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro Gen 5 2TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: Samsung 1TB 980 NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

  • 1 month later...

That's cool! How long did it take to print that?

Owned

 Share

CPU: Intel Core i9 13900KF
MOTHERBOARD: ASUS ROG MAXIMUS Z690 HERO
RAM: G.SKILL Trident Z5 6400CL30-38-38-28
PSU: Corsair AX1600i
GPU: Galax 4090 Hall Of Fame OCLabs Edition
Full Rig Info
Link to comment
Share on other sites

On 12/24/2020 at 8:36 PM, Diffident said:

My lastest print.  I'm giving it as a Christmas present.  Who doesn't love Claptrap....and he talks.

 

claptrap3.thumb.jpg.286b0056f14e636dfe6ae6a128d98610.jpgclaptrap2.thumb.jpg.be8af2d698972326e8a58cb003b4e695.jpg

claptrap5.jpg

 

Very nice project, great result!

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

I'm actually wanting to invest in a giant 3D printer, for business, not pleasure though.  Still haven't figured out yet what I'd print with one though. :doh:


I know for sure I could use one for various car audio purposes, and making my own custom bits and bobs for my ride.  I dunno, just a purchase and idea I had been debating for the last few months.

Subbing for just general reading and knowledge. :)

Owned

 Share

CPU: Ryzen 7900x
GPU: Sapphire Pulse RX 7900XTX
PSU: Cooler Master 850w Platinum
CPU COOLER: Cooler Master MasterLiquid PL360 Flux
MOTHERBOARD: Gigabyte B650 Aorus AX
SSD/NVME: Solidigm P41 Plus 2TB Gen4 NVME
RAM: G.Skill Flare X DDR5-6000
CASE: HAF700 Berserker
Full Rig Info

Too much

Owned

 Share

CPU: AMD Opteron 180 @ 3.0GHz
MOTHERBOARD: Asus A8N SLI
RAM: 4x1GB Corsair XMS DDR400 @ 2.5-3-3-6
PSU: eVGA 600BQ
GPU: Sapphire HD5870
SOUNDCARD: Asus Xonar DG
OPTICAL: DVDRW with Lightscribe
SSD/NVME: 64GB HP 2.5" SSD
Full Rig Info

Too much

Owned

 Share

CPU: AMD Athlon 1100MHz
MOTHERBOARD: ECS K7S5A
RAM: 2x256MB Corsair XMS DDR400 @ 133MHz / CAS2
PSU: Antec 350w
GPU: ATI Radeon 9800 PRO
SOUNDCARD: Creative Live! 5.1
OPTICAL: LG 16x DVD-ROM
OPTICAL 2: IOMagic 48x16x48 CDRW
Full Rig Info
Link to comment
Share on other sites

17 hours ago, pioneerisloud said:

I'm actually wanting to invest in a giant 3D printer, for business, not pleasure though.  Still haven't figured out yet what I'd print with one though. :doh:


I know for sure I could use one for various car audio purposes, and making my own custom bits and bobs for my ride.  I dunno, just a purchase and idea I had been debating for the last few months.

Subbing for just general reading and knowledge. :)

 

Custom shaped ports!

Link to comment
Share on other sites

1 hour ago, Zonalo said:

 

Custom shaped ports!

I was actually thinking dash kits, A pillar pods, door adapters.  Maybe get into the engines some with fuse panels, maybe air intake things.  I dunno, just been thinking of various ideas.  Tired of living paycheck to paycheck, and have a chunk saved up.  Just trying to think of what I wanna do with it lol.  Still thinking up various "hustles".   Being here on EHW, might just make me take the plunge lol.

Owned

 Share

CPU: Ryzen 7900x
GPU: Sapphire Pulse RX 7900XTX
PSU: Cooler Master 850w Platinum
CPU COOLER: Cooler Master MasterLiquid PL360 Flux
MOTHERBOARD: Gigabyte B650 Aorus AX
SSD/NVME: Solidigm P41 Plus 2TB Gen4 NVME
RAM: G.Skill Flare X DDR5-6000
CASE: HAF700 Berserker
Full Rig Info

Too much

Owned

 Share

CPU: AMD Opteron 180 @ 3.0GHz
MOTHERBOARD: Asus A8N SLI
RAM: 4x1GB Corsair XMS DDR400 @ 2.5-3-3-6
PSU: eVGA 600BQ
GPU: Sapphire HD5870
SOUNDCARD: Asus Xonar DG
OPTICAL: DVDRW with Lightscribe
SSD/NVME: 64GB HP 2.5" SSD
Full Rig Info

Too much

Owned

 Share

CPU: AMD Athlon 1100MHz
MOTHERBOARD: ECS K7S5A
RAM: 2x256MB Corsair XMS DDR400 @ 133MHz / CAS2
PSU: Antec 350w
GPU: ATI Radeon 9800 PRO
SOUNDCARD: Creative Live! 5.1
OPTICAL: LG 16x DVD-ROM
OPTICAL 2: IOMagic 48x16x48 CDRW
Full Rig Info
Link to comment
Share on other sites

When I say this thread my first thought was "what does it mean by prints?". Now I am super jealous. Next time I have some dickin around money this will be on the top of the list of things to use it on. 

Owned

 Share

CPU: 5800x
MOTHERBOARD: ASUS TUF Gaming B550-Plus
RAM: XMP 3600mhz CL16
GPU: 7900XT
SOUNDCARD: Sound Blaster Z 5.1 home theater
MONITOR: 4K 65 inch TV
Full Rig Info
Link to comment
Share on other sites

  • 3 months later...

I FINALLY got my printer up and running again. Have a couple trinkets for myself planned, as well as some parts for the FSAE team. Threw the headphone hanger pictured together in CAD real quick, and printed it later in the day. Works like a charm.

 

dZirJmK.jpg

Edited by Supercrumpet

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

  • 1 month later...

Since I've last posted, I've acquired a Creality CR-10S Pro V2 printer. Snagged it on Prime Day for $500, while it usually costs $680. The one I got was used and broken, as the extruder motor seemed like it had died, so I returned it and got one that's actually new. First interesting thing I've printed with it is a balcony box that's quite popular on Thingiverse (https://www.thingiverse.com/thing:3688892). Not the most useful thing in the world, but it's neat. Print quality wasn't perfect, as seen on the top surface, but otherwise it looked good. Still dialing some things in and trying out different settings. Planning some larger projects (hardware has been ordered), as well as some aerodynamics-related stuff for the FSAE team.

 

20210817_222514.thumb.jpg.3b42d091d9bd8eab3c9a165d8c52d424.jpg

 

The Ender 3's silicone sock around the heat block tore and doesn't stay on anymore, after a clogging incident. Causes some excess filament buildup and creates some annoyances when printing, so that's out of commission until new parts arrive.

Edited by Supercrumpet
  • Thanks 1

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

Battery storage feat. HD 7990.

 

20210818_190324.thumb.jpg.22212dfb1e0055df765abb5ad4d26649.jpg

  • Thanks 1

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

  • 3 weeks later...

I've had both printers running for the last couple weeks now, and I'm cranking out parts left and right. Mostly uninteresting QoL things for the printers themselves, but after a few iterations I printed some airfoil molds for the FSAE team. We're exploring using expanding foam in molds we make rather than machining much more expensive blocks of low density foam for airfoil cores. Here's the result of the very first run, obviously quite rough but pretty good for not having done anything like this before.

 

1812209983_ImagefromiOS(5).thumb.jpg.f875fee06fd78690a4e58a593bd65cf4.jpg

Edited by Supercrumpet

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

  • 1 month later...

Also tried printing molds to do layups directly on. Just a little test piece made up of three prints held together with wooden dowels and epoxy, will try scaling up soon. Just a few layers of fiberglass, and the first run ended up turning out really well!

 

20210924_133110.thumb.jpg.4594fbe5d40fdf04145ed7f1fa0f8fce.jpg

 

20210924_232117.thumb.jpg.adaad5b0e1c827aa8838135b54c0ad2d.jpg

 

20210929_185234.thumb.jpg.d1fda2876d6e13e9ca554536a2b04473.jpg

 

Also designed and printed this pointlessly over-complicated pencil box with a magnetic lid for some reason.

 

20211004_175837.thumb.jpg.544fde76a73fc93eb5bd89830bedb332.jpg

  • Thanks 2

3685.29

Owned

 Share

CPU: [AMD] Ryzen 9 3900X
CPU COOLER: [Cooler Master] MasterLiquid ML360R
MOTHERBOARD: [Asus] ROG Crosshair VIII Hero Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3600
SSD/NVME: [Western Digital] Black 512 GB NVMe SSD
SSD/NVME 2: [Team] 4x 1 TB 2.5" SSD
HDD: [Western Digital] Black Series 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Gaming
Full Rig Info

3647.79

Owned

 Share

CPU: [AMD] Ryzen 7 3700X
CPU COOLER: [Cooler Master] MasterLiquid ML240L
MOTHERBOARD: [MSI] MAG B550M Mortar Wifi
RAM: [G.Skill] Trident Z 4x8 GB DDR4 3200
SSD/NVME: [Crucial] P2 500 GB NVMe SSD
HDD: [Western Digital] Black Series 2 TB HDD
HDD 2: [Western Digital] Caviar Green 3 TB HDD
GPU: [EVGA] RTX 2080 Ti FTW3 Ultra Hybrid Gaming
Full Rig Info
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy