Tpbmods

What a wild project this one was...The Inwin 925 is by far the most prestigious case Ive ever worked with.

An absolute crowd pleaser at work and 100k views on Tpbmods, THIS IS FUEL!

Spec List:

CPU - i7 8700k Delidded @5.2ghz

Mobo - Maximus X Code in that Floro Red

GPU - RTX 2070S on EKWB Vector Acrylic

Ram - TeamGroup Vulcan Z 16gb (Thanks to Mikes Computer Shop)

PSU - Inwin pb1250w Sleeved with Teleios(Mainframe), combed with Clockwerk ind. Knuckles

Storage - TeamGroup Delta Max ARGB SSD

Lighting - TeamGroup Captain ARGB Controller

Cooling - Inwin Aurora 120 ARGB

Watercooling - All EKWB Baby! That FLT 360 d5 was a NIGHTMARE to get in here.

Combined with 2 360x45 rads, and a whole plethora of Quantum Torque fittings, the Velocity blocks kept everything chilly.

And I cant forget that gorgeous res designed by Leighton B!

Wow, well I have to say that is a job well done considering the method in which you achieved that.

 

Out if interest how long was this build process ?

 

 

​​​​

The exterior shell was shipped out from BC to AB(next province over) to my team mate, he invested quite a bit of time optimizing how much pattern he could cut based on the limits of his shapeko. That whole process from sending to getting it back was a month?

Once I got it back, I basically had a total of 12hrs a week to do any actual modding and building, minus holiday festivities. All in all its got about 60 man hours invested.

Nice ! Clean cut and love the black and silver. I am assuming the ''InWin" to the lower section of the case is your own etching ?

Thank you kindly. And yes indeed it was. I wanted to do a mood that had zero painting done, no vinyl, no acrylic. Basically make a mod that was as hard as possible too do at my desk! So the Logo was all done by dremel with an engraving bit and a stone

Well here we are, Just like 2019, The Industry is finally done!

It's been a long and fruitful journey this year; and I cant wait to show everyone what I have in works for 2020.

I want too give my greatest appreciation to Inwin USA, EK Waterblocks, TeamGroup and Dazmode for their continued support.

And I want to thank each and every one of you for following along on this journey of mine, It means a lot to me!

System specs:

Case: Inwin 905, CNC'd by @PartyBrosDesign

Cpu - Intel i7 8700k

Mobo - Maximus Formula z370

Gpu - Strix 2080

Ram - 16gb (4x4) TeamGroup T-Force DarkZ

PSU - Inwin PL850w

Cables - Tpbmods

Loop:

Cpu - EK Velocity Acetal

Gpu - EK RTX Strix

Pump/Res - Xres 140 Revo D5 Glass

Rads - EK SE360/PL240

Fittings - EK 16mm Torque Series

Fans - Inwin Sirius Loop 120mm

Oh boy! Good luck everyone

@ENTERPRISE I use Mayhem White Pastel UV Blue!

The fluid picks up the LED's really well, and with the addition of the UV led's firing from the front, it just pops!

I have one more build in the works that will be hardline, but then I will be making a pure softline build using the EK ZMT!

Project Blackout should be completed by the end of 2019!

Nice ! I will have to keep my eye out for those

They're all in the modding sub-forum

Currently working on an inwin 905 with the help of inwin/TeamGroup.

After that, inwin 925 as soon as it's available

Also, thanks for the share and support on the FB page!

 

 

 

Oh nice ! Is the case fully custom I assume ? I love the fact that you carried on the mesh look by popping it around the reservoir as well, finishes it off nicely...that and the maple leaf at the case front of course

 

Oh and do not forget to enter: https://extremehw.net/forum/main-forum/promotions-contests/1532-ehw-inwin-insight-giveaway-inwin-805-gaming-chassis

Thanks @ENTERPRISE, This was a phantek Evolv ATX that I blasted apart with a jigsaw The case is absolute dogsh17 for airflow, so that was priority 1. Second was too give it a very raw and unfinished industrial look!

I will definitely share the giveaway, as I already follow and like everything. HOWEVER, I dont feel it would be fair for me to enter the giveaway sponsored by a company who already sponsors me

Taking a step back into Sept-Dec 2018 This was my CAMC 2018 Entry on the dazmode forums.

Components:

Mobo - ROG Maximus Code z370

CPU - i7 8700k Delidded/LM/Rockitcool Copper IHS

GPU - EVGA 1080TI FTW3

Ram - Teamgroup T-Force Delta 2 RGB 4x4

PSU - Corsair AX1000w (total overkill I know)

Storage:

M.2 - ADATA XPG sx8200 gen3 x4 240gb

SSD - Samsung 850 evo 500gb

SSHD - Seagate Firecuda 2tb

HDD - Seagate Barracuda Compute 4tb

Watercooling:

CPU - Watercool Heatkiller pro4 full nickle

GPU - EKWB Acrylic FTW3 TI

Pump - EKWB Revo D5 PWM

Radiators - Rad 1 - XSPC 360x45 Rad 2 - EKWB PL 360

Reservoir - Thermaltake 170mm

Temp Sensor - Thermaltake

Hardline Fittings - Thermaltake 16mm

Softline Fittings - EKWB 5/8 compression

Angled Fittings - Dazmode Darkside/Bitspower/Nanoxia

Bulkheads - Thermaltake/Nanoxia

Drain Valve - Dazmode Darkside Pushvalve system

Misc fittings - Dazmode Darkside for a vast majority of them

Tubing - Primarily Dazmode Darkside, But some Thermaltake in the mix.

Cables - Which I make myself!

Sleeving - Mainframe Customs Telios and Dazmode Darkside

Wire - 18awg that I ordered from PC Mods Canada

Connectors - Mainframe Customs and Dazmode (depends on the connector)

Pins - Mainframe Customs

Combs - A mix of Nanoxia CoolForce up front, and Dazmode darkside in the rear.

In the final hours, I actually won a facebook giveaway and got myself some Delta 2 RGB, which I decided I would swap to in the last minutes

Had a bit if dye fallout, which isnt that big of a deal. I didnt throw in anymore lights as it took away from the overall look.

Heres some photos of the final submission.

Another month, another build... one of my top 3 favorite projects of this year. Velika Planina was named and themed in respect to EKWB and this gorgeous piece of mountain, and the beautiful purple flowers that bloom in its plateau. Fun fact, its only an hour drive from EK HQ!

This one is special to me, in so many ways! Tried out some new painting techniques, first time playing with fresh off the line watercooling, and I had the opportunity to document my work in finer detail and use the parts provided to me to create tutorials.

I made all the fan splitters from scratch and terminated the RGB fans into 1 plug per radiator.

This project was graciously sponsored by EKWB, It took almost 3 years modding to get the YES... And damn does it feel amazing.

The Tou2.0 Inspired front panel for the Inwin 303 came to me after having this case sitting at my feet for nearly 2 whole years.

System specs:

Cpu - Intel i7 8700k, Delidded at 5.2ghz

Mobo - Asus Maximus Code, with Mountain peak inspired paint

Gpu - EVGA RTX 2070 XC

Ram - TeamGroup T-Force Nighthawk 4x8gb @ 3200mhz , with Mountain peak inspired paint

OS Storage - Samsung 970 evo m.2

Game Storage - TeamGroup T-Force Delta 2 SSD , with Mountain peak inspired paint and UV LED's

PSU - Seasonic Focus +Gold 850w

Cables - Tpbmods, Made with Teleios

Full EKWB Cooling solution:

Cpu - Velocity RGB Nickel + Plexi

Gpu - Vector RTX 2080 RGB Nickel + Plexi w/Nickel backplate

Pump/Res - Xres 140 Revo D5 RGB Wrapped in mountains.

Rads - 1 PE/1 SE Coolstream 360

Fittings - All Torque series angled and HTC 16mm

Fans - Vardar 120ER RGB

Coolant - CryoFuel Indigo Violet

And now, in no particular order of favoritism, I give you... Velika Planina

And finally, some LED'less photos, as I havent taken any new photos yet!

Back at it again with another completed project. This time, the stakes are higher than a Canadian flag on July 1st.

Project Maple is my entry into the Cooler Master Case mod world series novice modding division.

This was proudly sponsored by Swiftech USA who provided me with pretty much every single piece they sell.

Build List:

Mobo - Asus Maximus X Code - Painted

CPU - i5 9600k @ 4.8ghz

GPU - MSI 1080ti Aero OC

Ram - TeamGroup T-Force Nighthawk 4x8gb 3200mhz

SSD - TeamGroup T-Force 240gb

PSU - Seasonic focus+ Gold 850w

Case - Cooler Master MB530p with plenty of cosmetic mods.

Watercooling:

CPU - Swiftech Apogee SKF Prestige w/Iris ARGB

GPU - Swiftech Komodo 1080ti w/CMWS19 painted backplate.

Pump/Res - (Cut down to 170mm) Swiftech Maelstrom 200mm(170mm) d5 w/Iris ARGB

Radiators - 3x Swiftech Hydrae GT(120/240/360) Painted Tornado red

Compression Fittings - Nanoxia CF 16mm hardline painted

Angled and extension Fittings - Swiftech Dual 45 rotary &15mm

Drain - Dazmode Darkside Pushvalve

Fluid - SwifTech "Mayhem" Dyes in distilled, and 1 drop of Dead Water

Misc:

Fans - Swiftech Helix 120mm w/Iris ARGB

Controllers - Swiftech Iris ARGB Eco Controllers

Cables - Tpbmods created, using Telios Sleeving from Mainframe Customs

Cable Combs - Nanoxia CF with splatter paint job

Paint - BombingScience.Com Ironlak/Moltow/FlameBlue

Hello EHW! I have decided to start off the modding sub-forum with all the projects I have completed so far in 2019!

Paracosmos started in a VERY different direction that I wasnt happy with. So, I went out and got a new mobo and case, and started over.

This project was designed to showcase the capabilities of the Swiftech drive x3 h240, and its expandable nature!

Build List:

Mobo - Asus Strix z390-i

CPU - Delidded i3 8350k @ 5.3ghz

GPU - MSI 1080ti Aero OC

Ram - TeamGroup T-Force Nighthawk 2x8 3000mhz

SSD - TeamGroup T-Force Rainbow 240gb

PSU - Seasonic Focus + gold 850w

Case - Heavy airflow modded NZXT h200i

Watercooling:

CPU - Swiftech Apogee LT w/Iris ARGB

GPU - EKWB 1080ti

Pump/Res/Rad - Swiftech Drive x3 H240/Swiftech Hydrae GT 240

Fittings - Nanoxia 1/2"

Angled Fittings - Nanoxia CF 45's

Fluid - Mayhem Pastel w/ Swiftech dyes

Misc:

Fans - Swiftech Helix 120mm w/Iris ARGB

Controllers - Swiftech Iris ARGB Eco Controllers

Lighting - Dazmode Darkside Rigid RGB

Cables - Tpbmods created, using Telios Sleeving from Mainframe Customs

Cable Combs - V1Tech

Hello EHW! I have decided to start off the modding sub-forum with all the projects I have completed so far in 2019! Today I give you APEX, a Swiftech USA showcase build featuring sponsored parts from Teamgroup and Nanoxia.

This was a very difficult project for me, as I have never done any sort of graffiti or graf techniques. Fading and blending with rattle can was a totally new experience, and expensive at that!

When Swiftech asked if I would be interested in working with them, I was over the moon to mod a showcase for the company that I bought my first ever watercooling parts from so many years ago.

Build List:

Mobo - Gigabite z390 Gaming X

CPU - Delidded i3 8350k @ 5.3ghz

GPU - MSI 1080ti Aero OC

Ram - TeamGroup T-Force Delta 2 4x4 3000mhz

SSD - TeamGroup T-Force Delta USB 240gb

PSU - EVGA 750g3

Case - Heavy airflow modded NZXT h700i

Watercooling:

CPU - Swiftech Apogee LT w/Iris ARGB

GPU - Swiftech Komodo 1080ti w/painted backplate.

Pump/Res - Swiftech Maelstrom 100mm d5 w/Iris ARGB

Radiators - 2x Swiftech Hydrae GT 360

Compression Fittings - Nanoxia CF 16mm hardline

Angled Fittings - Nanoxia CF 45's

Drain - Dazmode Darkside Pushvalve

Fluid - EK cryofuel Amber Orange

Misc:

Fans - Swiftech Helix 120mm w/Iris ARGB

Controllers - Swiftech Iris ARGB Eco Controllers

Lighting - Dazmode Darkside Rigid LED Strips - Orange(top and basement)

Cables - Tpbmods created, using Telios Sleeving from Mainframe Customs

Cable Combs - Nanoxia CF with splatter paint job

Paint - BombingScience.Com Ironlak/Moltow/FlameBlue

Without further delay, I give you APEX!

Hello EHW! I have decided to start off the modding sub-forum with all the projects I have completed so far in 2019!

Welcome to Project Glacier, the biggest headache of 2019.

After dozens of setbacks from terrible weather, waiting on parts from all over the place,

and tons of issues with paint... I present to you: Glacier

Mobo - ROG Maximus Code z370

CPU - i7 8700k Delidded/LM/Rockitcool Copper IHS

GPU - MSI 1080TI OC

Ram - T-Force TeamGroup Delta 2 RGB 16gb 4x4

PSU - Seasonic 850w Platinum

Storage:

M.2 - ADATA XPG sx8200 gen3 x4 240gb

SSD - Samsung 850 evo 500gb

SSHD - Seagate Firecuda 2tb

HDD - Seagate Barracuda Compute 4tb

Watercooling:

CPU - Alphacool Eisblock

GPU - EKWB EKFC1080ti

Pump - Alphacool Eisbaer d5

Radiators - EKWB PL 360

Temp Sensor - Thermaltake

Hardline Fittings - Thermaltake 16mm

Angled Fittings - Dazmode Darkside/Bitspower/Nanoxia

Drain Valve - Dazmode Darkside Pushvalve system

Misc fittings - Dazmode Darkside for a vast majority of them

Cables - Which I make myself!

Sleeving - Mainframe Customs Telios and Dazmode Darkside

Wire - 18awg that I ordered from PC Mods Canada

Connectors - Mainframe Customs and Dazmode (depends on the connector)

Pins - Mainframe Customs

Combs - v1Tech