HeyItsChris

Pssst... Modded BIOS Bro... Ps - I use Snander64, takes approximately 8 seconds to erase, 222 seconds to write & maybe 60 seconds to verify. Good to go. 110-15ACL_CH341A_BACKUP_Mod WWW.MEDIAFIRE.COM

Thanks yeah for Hawaii Grenada and any other of the sort GCN & Terascale & Beyond, I have achieved thermal limiters at 65,535W 65,535A power limit @ 79C operational temperature...

This is what I'm running now about 1925mhz memory @ 850mv vddci @ 1350mv mvddc @ 205w @ 79C hotspot. It's hitting over 2,200mhz at times on the core, amazing bios here. 5600XT_NAVI10_2300MHZ_1925MHZ_1350MV_2300MHZ_1350MV_OD_650MV_SOC_GFX_SENSORS_THERMAL_88C_84C_205W_205A_CALIBRATED.zip

@bonami2 Send me your vbios and ill make you a sppt if it's amd radeon? I could also make you up a ryzenadj profile to slow global warming bro? Let me know. We can do this 1 step at a time, and spread the word. I can do a lot of them, I got nothing but time.

I made this R9 290 Reference VBIOS with Custom Thermal Policy Array, test it out, let me know what ya think, fellow, enthusiasts? CustomThermalPolicyArrayOffset_0x0215_SAMU_0x025B_ACP_0x0262_1_Entry_400mhz_993mv_r9_390_timings_elpida_4gb_stock_offset_hypermemory_1133mhz_stock_voltage_80C_84C_65535W_fan.rom Ref_R9_290_4GB_Elpida_CustomThermalPolicyArray_BIOS.zip

I had to bend my heatsink and checked the contact patch, how's it look?

I'd recommend g5 se 5505 but its in need of reprogramming the system bios & gpu bios & repad-repaste/ check for flatness and proper contact.

I know how to fix this, I have a thread on it for the 110-15ACL, bro.

May you advise on how to fix a blinking light continuously fast led on power supply when plugged into the laptop Dell G5 SE 5505? 4900H gets hot when plugged in.

If anyone needs help with their Dell G5 SE 5505, let me know. I'm about to get my Dell G5 SE 5505 laptop & I am going to fully unlock the hidden options in the system BIOS & the VGA AMD Radeon RX 5600M VGA BIOS as well. Mine will be the AMD Ryzen 9 4900H model with 48GB RAM & dual nvme ssd's 1tb & 500gb samsung 970 evo. Not only that but I'm doing hardware mods to the system with new thermal pads & thermal paste & fixing up the fans, etc. Things I changed initially in the vbios is as follows Dell G5 SE 5505 5600M BIOS Modding: Spread Sprectrum Disabled For Higher Frequency, for PLL & DFLL (Phase Locked Lock & Digital Frequency Locked Loop) for the Core, but left Memory Spread Spectrum enabled All i2c Temperature Sensors enabled on slave address 224, VDDC, VDDCI, SOC, PLX, MVDD 88C shutdown temperature & 84C operational limit on EVERYTHING Overdrive set to 100% power limit, left 1800mhz peak for now in OD but with 2200Mhz peak memory slider capabilities, and all Overdrive Powerplay stuff enabled for AMD Radeon Tuning Stock 1750mhz core peak frequency stock value/ stock 1500mhz memory value left alone for now Fan Profile lined up to now operate at peak rpm 4,950rpm is written in the BIOS but I'll find out what it can actually do & 50C operational target temperature Set the atom_voltage_objects_info_v4_1 (forced) & svid2 voltage controller IR35217 to -25mv programmable offset on VDDGFX & VDDC & VDDCI & MVDDC for extended thermal performance

@kithylinSweet. Thanks. Yeah I can help. I have a Gigabyte R9 290 4GB that I play on too sometimes, its bios modded in Windows 11. Anyway yeah I can help, send the bios over, install this os & let's roll, broski. By the way, for anything Non-Vega or even Vega, let's move these discussions over to this thread :

That's amazing results @kithylin If there is anything else you need, let me know. According to what I did with the 200%, so that would permit you to push it to, what if 100% would be 500W, then 200% would be capable of 750W, but I did apply the safe throttling limiters on all sensors @ 84C with a 88C shutdown in case the fans fail.

@kithylinCool, I'm guessing you meant 1.15V, right? By the way, I set the power limit as it stands, 200% I think & 250W 250W or something like that. No need to physically mod anything, its all in the vbios bro, so easy.

@kithylinAmazing results, I even upped the vcore to 1.250v from 1.2v, amazing you can achieve those numbers on that 270w tdp & what not. Did you adjust the fan or is it auto? Thanks. Hwinfo64 screenshot of gpu section would be nice.