Duality92

With current PPD, we could calculate which cards would be best ppd/$ I know six 1070's would get you 4M to 5M PPD without a huge power draw and decent output. 1070 go used for like $200 to $250 CAD.

I must be misunderstanding the bench scores in the article as it looks like they are miles away from that ? don't forget, these are early ES samples and not a K series chip. So you can at least expect this specific chip 200MHz above what it is on this video and the K series chip quite a bit more than that. It might not even be boosting properly for all we know currently.

for CBR20, they need at least 1250 points per two hyperthreaded cores (per 2c/4T) stock on a K series chip if they want to keep their crown.

OS: Ubuntu+NextCloud Case: Silverstone RM21-208 CPU: FX-8800P Motherboard: Biostar FX-8800P Memory: 2*16GB TeamGroup 2400/17 PSU: Silverstone Nightjar passive 600W ATX OS SSD (it SHOULD be an SSD lmao): 1.92TB Seagate IronWolf NAS Storage Mediums(s): 8*14TB in Raid 10 Server Manufacturer : Me Hosted at a friends house who has 500/500 internet, I have my cloud as my offsite backup, as well as accounts for quite a few of my friends with about 2TB of storage each. OS: W10x64 home Case: ECS Liva Z2 CPU: Intel Silver N5000 Motherboard: ECS Liva X2 Memory: 2*4GB DDR4 SODIMM PSU: 45W AC Brick OS SSD : 32GB eMMC Storage Mediums(s): 1*4TB Seagate 2.5" HDD Server Manufacturer : ECS I guess.

My two builds were da bes.

Hey guys, this is one of my builds for CES this year, both for Aorus, but here's the first one Thermaltake View 71 Modded (Removed parts, cable tucked, painted window, some vinyl work, shaved front I/O, etc.) Thermaltake 1200W ARGB 32GB Ram RGB Aorus RTX 2080 Super Aorus Xtreme Waterblock SSD Aorus 1TB PCIE 4.0, NVME (Copper heatsink model, de-heatsinked) Thermaltake watercooling with PETG 16/12 and CPU/GPU in parallel CableMod power and power LED along with PCIE screws Fans are 140mm Riing Trio

TR3 won't be on X399, I can confirm this right off the bat, but can't really say anything more. https://www.anandtech.com/show/14963/trx40-chipset-for-3rd-gen-threadripper-listed

This is literally just water, in a bucket, with spray paint on top and dipped the thing right in it.

I've long wondering if I should get one of these. I'll soon have a spare core 2 quad rig with 4GB DDR2, so I figure that'd be enough right? I'd have like up to 10 wired connections total.

I did a few modding experiences lately, namely plastidipping a motherboard along with paint hydro dipping, I wanted to gain knowledge regarding these two modding techniques. I say both went VERY well! The only downside, is that I'm not sure where or how, but the motherboard LEDs do not work anymore appart from the I/O shield which stays purple. I'll eventually be tearing the whole thing down again and reassembling the motherboard to make sure everything is connected as it should. Anyways, I learned a lot on this project and I think the results are still quite good! I had to mod this InWin USA 103 to fit an Alphacool English UT60 360 in Push/Pull! (110mm total thickness!). There was a bracket up top which needed a lot of trimming since it holds both the dual hard drive bay along with the I/O ports so I could not just remove it! Intel i9 9900K AORUS Z390 Xtreme TeamGroup Dark Z 3200 MHz GIGABYTE RTX 2070 Super OC Seasonic Prime Ultra Titanium 850W CableMod Custom Pro ModMesh cables Alphacool Watercooling all around (except water block) Watercool HeatKiller Acetal Nicklet waterblock Apacer Global Z280 256GB NVME SSD

I've tried 2-3 mounts already, exactly same result, this is a cheap ebay ES sample. It has other issues too like not saving ANYTHING in the BIOS relating to it.

This CPU doesn't have that slot working properly

Gieb premium and staff.