newls1

yes, im still very interested but buying into this platform im guessing will be VERY EXPENSIVE!

enterprise got me fixed back up at OCN!

im sorry to hear about your MSI and Phanteks experience! YOu cant catch a break it seems. Thank you for your input, it is much appreciated.

@ENTERPRISE , I have asked him via PM's and he is nice enough to look in on this and try to help me out. Ive never done anything wrong there, and if I have... someone needs to SHOW ME what I did. Ive been a long time member there and have helped a lot over there only to be greeted with what I guess is a permaban for circumstances I just dont understand. Anyways.... I just run Y-Cruncher 2.5b for 2-3 back to back quick runs, is that bad? Yes, its a supercool direct die block. Wow, we have the same board, thats rare as most have moved on to the million dollar apex or kingpin boards. I have ZERO issues with this unify x and will go as far and say its the best board ive ever owned. Im staying on A.80 forever... I have zero reason to try anything else. I know I was DETERMINED to get 7730 to train, but after finding proper voltages and 3-4 back to back full power cycles (pull cord from wall, hit power buttom to drain residual power, replug power cord in) I repeated this a few times in a row then 7700+ will train and retrain 100% of the time. Most dont understand that about this board and I hate seeing people saying 7200 speeds/7400 speeds/7600 speeds cant be had on this board... IT CAN IF YOU DO ABOVE!! its patience training!!! Sir, I value your input and if you can let me know about my y-cruncher runs, if im hurting my cpu for those quick runs, id sure appreciate the feedback. The Current VOUT was 259A, is that bad for about a minute long benchie? Sir, I too have the phanteks waterblock on my 4090 and ITS AMAZING!! Very nice quality and i must have been lucky cause i ordered it a month ago as it was "In stock" on their website, and 2 days later I had it in hand. Beautiful block and the best part was the thermalpads were all pre cut and no guess work on application!

my latest TS bench @ all core 6GHZ with my 4090 on galax 666 bios

In this mist of saving me 700$ I decided to try 6ghz all core on my 13900K this morning, and using 1.375v, I get 1.310v under r23 load and thats VROUT actual voltage and 340watts all core loaded WITH E-Cores @ 4.65. Here are a few pics of y-cruncer and R23. The CPU will never be under this kind of amperage load as its a gaming PC after all, but having 6ghz is pretty cool and I feel lucky that I can pass y-cruncher and r23 at this speed. Am I going to be okay with this?

I set 1.35 in bios on a static Vcore, and get 1.28v under CB R23 load. IIRC correctly my watts are 308ish (chip is direct die cooled with a very nice water setup) Youve helped me countless times on OCN, but for some reason i got banned FOR I HAVE NO IDEA WHY!?

My local MC has it in stock but everything inside me is trying to talk myself out of going 700$ in debt for it! The need to always have/want the best of the best is such a terrible drug! Im currently @ 5.9P/4.6E/5.0ring and my mem @ 7730 (Unify X holding me back there im thinking) so other then having hopes to gain stability @ 6GHz would be the fun out of this... MAN I hate these decisions!

https://videocardz.com/newz/intel-confirms-xeon-workstation-w3400-w2400-series-launch-on-february-15th So intel finally will release the new "X" series CPU with W790 platform. If you look at the model chart shown, there will be 8 models for HEDT release. My question is obviously it will be rather pricey platform, but should I hold off on buying the 13900KS coming out in a few days to see what the prices of those cus are and what the motherboard options will be like? Also are these cpu's using raptor lake cores? are these cpus ALL P-Cores// OMG that would be just so freaking amazing! Whats your thoughts here.... think the X series cpus will OC decent??? Appreciate any feedback ** EDIT... I think I found the answer. they use golden cove cores ... Not so sure I want this. Isnt this the same cores that 11th gen used? Intel Sapphire Rapids-WS Xeon Workstation CPUs Leak: Up To 56 Cores, 8-Channel DDR5 Memory, 112 PCIe Gen5 Lanes In Monolithic & MCM Flavors WCCFTECH.COM The entire Intel Sapphire Rapids-WS Xeon Workstation CPU lineup has leaked out in addition to the W790 'Fishhawk Falls' platform details.

thanks Pook!

Just curious to s ee what your opinion is on my pagefile size. My PC has 32gb and page file is set to 2048... Thought it should be close to 5Gb but this version of win11 seems to think different. Should I set it higher or leave it as is? Ive always noticed my HDD activity light is always blinking and ZERO background apps are running and thought id ask if maybe this has anything to do with it. Thank you

https://videocardz.com/newz/intel-core-i9-13900ks-6-ghz-cpu-has-been-spotted-in-china I have a pretty good 13900K @ 5.9 @ 1.35V so im having a hard time deciding if its worth it to purchase this?! You think 6.1 all core @ 1.35v might be doable?

That looks fantastic Mr.Fox! I wish my Unify X could do that tREFI and speed otherwise i think id be right there with you. Most I can get my board trainable with is 7730, and unless I go back to 67-6800 speed range, my board just wont boot with high tREFI.... Congrats on your tuning sir!

Hi on Life has my 100% attention. Such a funny and enjoyable FPS. Refreshing

ok sir, thank you

Im wondering if anyone has a stabilized a mem speed of 7700 or greater on this board, and if so could you please share how? Im at 7730 using my G.Skill 7600 ram @ 34/46/46/34 @ 1.45v and it took multi hard power cycles and multi long mem training sessions but finally stable with these settings. Cant for the life of me get anything 7800 or greater. Is this going to be a board limitation? My ram and everything inside my pc is completely watercooled so temps arent an issue. Thank you.

Here is my best PR result.

if someone wants to PM me with what the sale price is, i might be interested in a purchase.

CPU delid is complete, im just trying to remove the black silicone that sealed the perimeter of the IHS to the substrate and using 91% alchol and this damn wood scrapper that rockitcool ships with their delids kits is just taking for damn ever. Anyone have any pro tips for removing this stuff? Be much appreciated. Heres a pic to show you what i mean

Ripped apart my Core X9 12900KS pc today to delid CPU and remove all water cooling and build back up my dual loops (1 CPU and 1 GPU Loop) as I added SYMETRY! both loops now feature dual D5 with EK dual D5 housings, and matching 250mm res's with custom mount on front rad. I think it turned out pretty fantastic. Obviously its a wiring mess right now but just a few quick pics doesnt hurt anything. Also, I delided the 12900KS, have no idea if it survived but i can only hope.. The delid process went pretty easy I think, just have to figure out what people use to remove the damn black silicone on the substrate as its a * to get off! Anyways, as I wait a few more weeks for the Supercool direct die block and my eVGA FTW3 3090Ti waterblock... ill post pics when all complete.

no idea on white bckground issue...? I mean im using a white themed skin i guess... no idea

Was using a TP-Link 2.5gb switch ( https://www.amazon.com/TP-Link-Unmanaged-Multi-Gigabit-Desktop-TL-SG105-M2/dp/B08SWPLGXF/ref=sr_1_13?crid=9RQDNXS74HIH&keywords=2.5gb+switch&qid=1654966098&sprefix=2.5gb+switch,aps,67&sr=8-13#customerReviews ) But this died after 6 months of use.. POS! I see this ( https://www.amazon.com/Asustor-Unmanaged-Ethernet-Wall-Mount-ASW205T/dp/B09HQFSKWS/ref=sr_1_17?crid=9RQDNXS74HIH&keywords=2.5gb+switch&qid=1654966098&sprefix=2.5gb+switch,aps,67&sr=8-17 ) I like the price, but wondering if realtek chipset is okay to go with.. I also see a slightly more expensive switch thats using broadcom chipset.. Which chipset do you all recommend? This is the broadcom chipset swich ( https://www.amazon.com/QNAP-QSW-1105-5T-5-Port-Unmanaged-2-5GbE/dp/B08F9ZL9LY/ref=sr_1_1?crid=23PXPA2B8J8AF&keywords=qnap+qsw-1105-5t&qid=1654966459&sprefix=QNAP+QSW-1105-5T,aps,51&sr=8-1 ) *&EDIT.... Ended up buying the QNAP, the reviews were awesome.. https://www.amazon.com/dp/B08F9ZL9LY?psc=1&smid=ATVPDKIKX0DER&ref_=chk_typ_imgToDp

Thanks for the replies guys, much appreciated. Not sure why you guess thought I was concerned about the heat dump of a D5, but i could care less about that and my post says nothing about that.... I have PLENTY of surface area to compensate the 20 or so watts of heat a D5 adds. Just was wondering if high flow would ever hurt performance, but im guessing not. Thanks y'all. Ill go ahead and add a Dual D5 pump setup in the gpu loop for shits and giggles

Does anyone know first hand if having to much water flow will hurt performance? I guess thinking about it logically in my brain, having to fast of flow will not let water in rad long enough to dissipate heat effectively?. I was wanting my GPU loop to match my CPU loop, and that loop uses a dual D5 EK pump housing, and I have a spare dual D5 EK pump housing sitting here and was thinking about adding that to my GPU only loop so both loops will be identical. I have 3 D5's laying around along with that Dual D5 housing so I figured why not! But i certainly dont want to hurt performance. If anyone knows this answer please make me smarter and let me know! Thanks

ill be damned..... Just got an email saying "SHIPPED!" what a coincidence by god. I hope it makes it 1/2way around the world safely.