tictoc

53 minutes ago, J7SC_Orion said:

 

...looking forward to your R-DDR5 4-channel  results....Asus Sage mobo ? R-DIMM rated speed ? I have seen a few folks at another forum with 7960X and 7980X on the Asus mobo w/overclocking, including R-DDR5 to 7200. I am on the fence for a mew work-play system re. 79xx TR, or wait for the 99xx TR (Zen5 cores). This time, the socket should remain the same, so they say...

Motherboard is an ASRock TRX50 WS. ASUS Threadripper X399 and sTRX40 boards were not good, with missing features, bad RAM support, poor ECC support, and lots of random bugs.  Meanwhile, my 3 ASRock boards have been excellent, and that includes top notch support from ASRock.  I haven't followed along on the TRX50 Sage, but the WRX90 Sage looks to be a bit of a dumpster fire.

RAM is DDR5-5600 that I'll be pushing as high as it can reliably go.

The per core performance upgrade from my 3960x is pretty huge. Even if it only lasts a single generation, I'd be pissed at getting burnt again, but I'd still be sitting pretty good for the next few years.

7960x is going on the bench this weekend to get it dialed in and prepped to swap into my daily system. 

Looks like there is a fair bit of info in this thread regarding DDR5 tuning. This will be the first AMD DDR5 system that I've tuned, so we'll see how it goes with 192GB of DDR5 RDIMMs.

2 hours ago, Avacado said:

I know that running season specific tires will always be better than all seasons, but I am not taking the time or energy required to change them. I'll take the performance hit. 

This is especially true, with how good all seasons have gotten over the last 5-10 years. Additionally, you save some significant change, since typical all season treadware is at least double any good summer tire.

I probably wouldn't drive on the Contis in temps much below freezing, but they aren't total hockey pucks at 35-45°F.

I had a set of garbage 18" cast wheels that I was running in the winter, but this year I was finally able to find a set of 17" steelies that clear the Brembos with 1/4" spacers. Much nicer driving on the 17s with a bit more sidewall.  Even better than the softer ride, is the fact that I don't have to constantly pull over to clear the snow and ice out of the wheels, to get rid of the death wobble at speeds over 45 mph.

8 hours ago, CoolGTX said:

Continental Extreme Contact Sport, are great tires for warm weather only grip

275/35 ZR20 102V on my Roush = skid pad over 1G with a car that is over 4000 lbs

 

Continental ExtremeContact Sport vs DWS 06 PLUS - Top Tire Review

TOPTIREREVIEW.COM

---

In depth analysis of Continental ExtremeContact Sport vs DWS 06 PLUS with wet, dry, noise/comfort, wear, snow & price evaluated.

 

I ran a few sets of Pilot Sport 4S' from when they were released until last summer. I switched over to the Extreme Contact Sport 02 last summer, and I was pretty happy with them.  Steering feel is a little dead at center, and can feel like a bit of understeer at initial turn in, but after that they are pretty responsive.  I'll be running them again this year, as soon as I can swap out of my snow tires. Usually the summers can go on the first or second week of May. I'll probably be switching back to the 4S's next year because they run better in colder temperatures. Temps at my house frequently drop to at or below freezing all the way into late June, and start up again in mid-late August.

@avacado I think you'll be pretty happy with the DWS's. I know a few people that have them, and if I was going to run no seasons they would probably be at the top of my list.

In Q_Cruncher

Out on prizes

2 hours ago, The Pook said:

anyone who willingly buys/uses a keyboard with a half-size right shift is not to be trusted 

Do a split right shift and an ISO left shift (1.25u) cancel each other out, or does that just ramp up the untrustworthiness?

Waiting on some caps for the Model F, and then it will be complete.  Loving the board and layout, so I'll either be dampening and floss modding another one, or I'll have to go full custom for a matching board/layout for the office.

** PSA **

Pro Tip - If you are doing any sort of an involved teardown/rebuild use a paint marker to track progress of nuts/bolts/connectors that have been final torqued, connected, etc and are complete.

I nearly cost myself an engine in the STi due to a wee little bolt that backed out.

Houston we have a problem. 

That's an interesting location for a bolt. 

The bolts for the timing belt guides should all have either a light weight thread locker or RTV (depending on location) to ensure that they do not back out from vibration.  I am usually pretty thorough about tracking my progress during a build, but right at the end of putting this engine together I must have got in a hurry.

Luckily before the bolt wedged itself between the tensioner and the guide, it broke off one of the teeth that the crank position sensor reads on the crank sprocket.  That confused the hell out of the ECU, and timing and AFR was all over the place, with the ECU trying to compensate for the whacky readings it was getting from the crank sensor.  That quickly threw a CEL (P0335), and after checking all the easy possibilities (loose and/or faulty electrical connections) I popped off the left side timing cover to verify that the timing belt hadn't jumped, and discovered the above.  No telling how long the belt would have lasted before it let go, but it threw the CEL right before I got on the interstate, and I was able to swing into a parking lot to figure it out.

I have been using the F77 for the last few days, and it is a joy to type on.

Fit and finish is excellent.  No firmware issues, and everything worked without a hitch after adjusting the springs on a few keys. 

This is going to be my new daily driver, replacing the TKL Filco and the Unicomp Mini M that I have been using for the last 5 years. The obvious major difference between this board and a traditional TKL is the lack of function keys. I went with the HHKB layout, so having the split right shift makes this basically a non-issue for me.  My typical workflow doesn't make huge use of the function keys, so after a few days, I am mostly used to the lack of function keys.  I will be converting the Left Shift to a split key and then reprogramming a few things, prior to ordering a new set of keycaps.  

I might swap out the traditional case for the ultra compact case.  The ultra compact case is only a bit wider than my Filco TKL, so with the smaller case, I can keep the same neutral mouse position that I have grown accustomed to.  I really like the look of the traditional case, so I'm not sure which one I'll ultimately use.  I'm going to wait until I get the new keycaps, and then decide on which case to use.

I got my new Model F77 in the mail today.  A few quick pics and I'll post some more info once I get it up and running.

I ordered the ultra compact case in addition to the traditional case, but I'll definitely be using the original style case.  It is a beautiful tank, weighing in at just under 9 lbs.  Last pic is just a comparison pic to my Unicomp Mini M.

Upgrade time. 

6 hours ago, Alex said:

Million mile WRX when?

At my current pace, I'm about 22 years from hitting the million mile mark. I don't think I'll make it there, but 500k might be possible. 

The new short block does have me a little worried (not really), since it's the first EJ block I've had that doesn't consume oil as part of it's daily diet.  The original block in this car would typically lose 1+ quarts every 3k miles, and every other one, consumed at least 1/2 quart between oil changes.

13 hours ago, Fluxmaven said:

 

Did you get the Solenoid with it? I remember when this project first came around. I wouldn't mind having one but I really don't need another keyboard lol

I ordered the solenoid, but I will likely not use it. I also ordered both the original style and the ultra compact case. I'll post up my thoughts once I get the board.

Not sure if anyone here would be interested, but about half of the the new Model F boards from Model F Labs are on sale.  I snagged an F77, and I'll post up pics when it arrives.  Shipping time also seems to be way down from what it was before.  Some recent orders I know of have gotten their boards in a few weeks.  https://www.modelfkeyboards.com/store/

It's been a minute since I was on the forum.  My daily is still going strong 33k miles on the new short block, and crossed 300k for the first time on any of my vehicles. 

54 minutes ago, iamjanco said:

 

I had the Streamlight 69889 TLR-1 HL. It definitely put out a lot of light, but its battery compartment cover was a very weak link (fell apart as soon as I took it off).

 

I replaced it with the green dot version of what follows, which I'm very happy with thus far:

 

Surefire makes really good gear, and does it right here in the USA. That's a great choice. 

On 26/10/2023 at 13:29, iamjanco said:

New toys (it's like building models w/o the glue)...

 

 

Had to return the tactical light; it didn't pass muster. I'll order something different.

 

Not sure what light you had, but the StreamLight TL-Racker is great if you have a Mossberg 500/590 or a Remington 870.

https://www.streamlight.com/products/detail/tl-racker

I'll be on the look out for the ASRock boards.  I've been pretty much all ASRock for the last 10 years, and ASRock had the best board layouts and features for me on X399, TRX40, and WRX80.  Also all of the previous generations had great bifurcation support and far and away the best ECC support.  It will be nice to be able to run RDIMMs on the new platform, and not have to spend the premium for ECC UDIMMs.

6 hours ago, J7SC_Orion said:

Next step is to watch for mobo releases for both classes by Asus, Gigabyte & Co WITH PBO and other oc features; my oc'ed TR2950X already peaks at ~ 330W so custom cooling is a must but also not too hard to do; wondering though about the compatibility of current TR full-IHS water-blocks...

Noctua is offering mounting brackets for their old Threadripper coolers to work on the TR5 socket along with new coolers. https://noctua.at/en/noctua-announces-cpu-coolers-for-amd-s-new-threadripper-and-epyc-processors

Eyeballing the socket on the Gigabyte board that leaked, the layout is very similar (or identical), to SP3 and sTRX4.  The Noctua press releases mentions increased mounting pressure, but that wouldn't be a big deal to achieve on most full cover blocks. 

1 hour ago, mx500torid said:

Gonna give it a shot so IN. Im wondering if anyone is folding on linux with an rtx card. Wondering if the ppd is better. 

I don't have any recent comparison numbers, but I don't think much has changed in the last few years.  You should see higher PPD/unit on Linux vs Windows.  I haven't really ran anything on Windows in many years, but the PPD on Linux was always at least 5% higher than on Windows back when I was actually doing some comparison tests.

In Q_Cruncher

Out on prizes.

AMD's press release: https://www.amd.com/en/newsroom/press-releases/2023-10-19-amd-introduces-new-amd-ryzen-threadripper-7000-ser.html

Release Video: https://www.youtube.com/watch?v=BF6QbE9rFkM

The bump up to 88 PCIe lanes (48 PCIe 5.0) is a nice upgrade over TRX40.  Too bad AMD didn't do something more exotic and kit out the TRX50 with 6 channel memory (half of Epyc).  At $1499 for the 24 core, I see an uprade in my future.  

Threadripper 7000 and some 7000pro CPUs are set to release at retailers on Novemeber 21st.   

If TRX50 happens, I will be upgrading my 3960X. 

I can't really justify the Threadripper Pro SKUs, but I would really like to upgrade my workstation.

Hopefully this time around there will be at least two CPU generations.  I was pretty salty when AMD killed the HEDT platform, and only released the 5xxx CPUs on WRX80.

https://videocardz.com/newz/amd-to-launch-threadripper-7000-pro-and-non-pro-zen4-cpus-designed-for-wrx90-and-trx50-motherboards

On 06/09/2023 at 06:29, Northwave said:

Hey !

Im currently rearranging my server in the same case. Would love to see a photo taken from the top, to see how much space is behind the HDDs. Thank you ! I will print the hdd holder with 3d printer and to see this in before, would help me a lot.

Sorry for the late reply, I've been out of town for the last couple of weeks.  Here's a shot from the top with the fans removed.

On 09/08/2023 at 19:00, ENTERPRISE said:

That is a nice build for the purpose, case looks like an awesome choice too. Out of interest, is this not going to be on 24/7 ? Only because I noted you saying you would use WOL.

 

My fileserver is on all the time but it runs more services than just file access. 

 

I know back in the day it was less wearing on HDD's to leave them on rather than powering down/up all the time. Im not sure how 'Hardy' HDD's are these days in that respect, haven't kept up with the data om that.

This is probably still true, if for no other reason than thermal cycling electronic components pretty much always hastens their eventual death.  How much it really matters is up for debate.  Exos drives are rated for 600k load/unload cycles and 50k start/stop cycles, so starting up and shutting down once a day wouldn't really put a dent in the rated lifespan.  

This will likely not be the way I run this.  I was just fiddling around with further reducing power consumption.  The reduced power consumption is not really worth it to me, with the increased chance of a failed backup due to a start-up/shut-down or WOL packet error.

With zero tuning the system idles at 78W.  More than half of that power is the drives, nic, and HBA.      

Storage will be updated fairly soon, since I will be retiring a few 16TB drives out of my main server.

Server will be headless running Arch Linux, and will be mostly asleep using WOL to wake the server idle for backup tasks.