kaliz

very nice, do you have a zentimngs sctreenshot, ZenTimings ZENTIMINGS.PROTONROM.COM ZenTimings is a simple and lightweight app for monitoring memory timings on Ryzen platform.

Do you have any particular question about setting up your mobo settings? Or just everything from scratch? First of all disable all CPU things like: spread spectrum, global c-states, virtual machine(vt-d), core performance boost, also disable PBO completely all the voltages, frequencies, timings: for all of them, dont use auto settings but instead dial it in. i like to use the EXPO settings at first later you can tweak. 4x16GB Hynix M you can get 6200C30 in 1:1 mode but not Much more. That will be around 1,25v soc, maybe up to 1,55v vdd/vddq but chances are you can get away with lower voltages. For 1:2 mode, what is prefered with dual ccd chips, you can use 2x16GB and Maybe get 8000 to work but i have not tried Hynix M-die at those speeds yet. If you have any particular questions pls feel free to ask!

i made a ycruncher sub for the AM5 section with 7500F, grabbing the 7800X3D will gain another 15 seconds so might do that? If anyone else have a 7800X3D feel free to upload

it was really a pain to get it! ordered it from a shop in NL they ordered it in DK, it shipped from SE, i have another one without the LED panel, that one only cost 32 euro so was lucky with that! the one with panel was 92 euro. They have mesh front panels too but at the time only the closed ones

got this jonsbo case a couple months ago now with all my white components and that kit of b-die, actually runs 4500+ so gotta try it with 5700G as well

VID_20230830_173324.mp4

swapped a 7700X for the 7800X3D and i have a 7500F to play with, couple of mobo's Had the AM5 parts laying around for some time now but after Agesa 1.0.0.7 i find it more fun than any other platform to tune. specially RAM. its insane how much better it is vs a month ago

thats gonna be a beast of a system! Did you get the 8000 binned 24GB modules or are you manually tuning to 8000?

for sure! you need some room in your case though. the 360mm LF2 is recently surpassed by a couple others including the ekwb nucleus and new phanteks afaik,and the best looking cases are still mid towers imo so no room for 420. I have a spare 120 LF2 , the little chipset fan gets pretty loud after some years but the cooling is exceptional for 120mil. really strong pump

couple samsung b-die 8gb

Gigabyte Aorus Radeon RX 6800 Master 16G with temp indicator for 499 , next month the 7700XT will be more expensive and way less powerful. Could be way wrong but... Got it for the looks anyway

After i saw the ExtremeHW review video of the EKWB Nucleus AiO i knew i wanted it, so i scored one as good as new for 159 euro shipped on tweakers.net. I left the RGB lights off, but the 3 fans subtle white. Its a very strong AiO , at the top with Phanteks and Arctic in other reviews as well so cant wait to get some bclk OC and Cinebench rolling. Oh and the Taichi Lite just runs DDR5-8000 at first startup very easy so pretty stoked for that too

i will have a Ryzen 5 3300X 4 core CPU this weekend, jolly good /img/logo.png Overclocking, overclocking, and much more! Like overclocking. HWBOT.ORG HWBOT is a site dedicated to overclocking. We promote overclocking achievements and competitions for professionals as well as enthousiasts with rankings and a huge hardware database.

got the all black version of the Lancool 216 and probably will be using a EKWB Nucleus 360 with it

that is why i sold the 'regular' B650 mobo to get one with a baseclock generator so you can set a multiplier of 50. really annoying i couldnt get a legit score without 'cheating' in benchmate.

i can get a 3300X for 40 euro, ive sold my 2600 for 55 maybe i will get it its a single CCD ZEN 2 part with 4 cores and 8 threads, i can also use it for the Oldzen ram comp for a DDR4 OC record

i think if we for instance have 5 subs only the 4 best will count? I have a 7800X3D for a pyprime, will be up soon. And a 5700G for pi2.5b

Meshify 2 for that price yes please, Here the Lite starts at 140 , the closed Meshify 2 starting at 150. Ive only had a Fractal Design once years ago it was very low quality and plastic window etc. I do like Phanteks but their budget cases look virtually the same as the high end and i already have 2 Phanteks. The problem with mine is i have 2 Grey colored ones and after only a few years the paint is completely dull , like smeared out finger stains and i cannot wash it of. The Lian Li Lancool 216 ... hmm still not 100% sure but it does have all the features and its 100 euro for the black version with or without rgb.

mobo: B650E Taichi Lite E-ATX with regular straight 24 pin connector, so cases like 4000D with wire cutouts, the 24p cable doesnt fit 'nicely' cooling: top mounted 360mm AiO / or if possible (there arent many around a 420 AiO, but thats above my budget. budget up to 120 euro maybe if it really good a bit more it comes with 2 160mm fans on front and one 140mm back. I have plenty of fans, both white and black and RGB, still not sure what is best with this case, Full black n white build, full black non RGB or black with RGB. just want it to look decent. I will be using 3 fans on top with very dimmed white light so you can see the board. The board is black. I dont like RGB but i do like white light illuminating the build. Will the White case whit white AiO and black mobo with black and white braided cords look good, or a full black build looks better? LANCOOL 216 LIAN-LI.COM • Mid-tower chassis configurable for air cooling and water cooling • Airflow optimized front, top and PSU shroud side mesh panels • Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear...

not planning to use a GPU with over 250W draw, 3060ti, 1080, something like that, RX 7600 8GB main GPU. Will those low end cards be an issue with that PSU for transient spikes?

not planning to use any of those cards, however i have a 3060ti and i will be using it every now and then with that unit...

My brand new Delta 850W Platinum PSU i got a couple months ago is dead. It took a 2TB Kinston NV2 with it im afraid. My B650M Pro RS and the rest is still good. i just sold the Asrock Pro, now ready to drop 7800X3D in the Taichi! I returned the PSU to Alternate... thought Delta is an established brand but there are multiple bad reviews the last couple weeks for this particular batch as seen on Tweakers. All bought from same store. So i got a proper high end unit from a guy on tweakers.net, a ROG Strix 750G, made of of a Seasonic Focus PLUS Gold but with larger heatsink and larger fan. Brand new in box 70 inc shipping full 10y warranty. So i now i have 2 ROG strix items in this PC and you wont even see them

i had the GPU less than a day, delta T core - hot spot was 30C+ so returned it. I think i still got the Starfield code though. I do need a GPU and i want something AMD whit 8GB GDDR6, more i dont need. So i got this one for 255 on amazon PULSE AMD Radeon™ RX 7600 8GB WWW.SAPPHIRETECH.COM PULSE AMD Radeon RX 7600 8GB Graphics Card for gamers chasing low-noise 1080p ultimate gaming with factory overclock

Was also looking at high end Gigabyte and other manufacturers high end Z790 boards recently, preferably with 2 DIMM slots. I was very hyped for the Z790 Tachyon, pretty much unobtainable here in Europe as well. So I think you are right Gigabyte leaving the western market quietly. I managed to get a Z690 Tachyon for 299 euro which is also one of the best specced 1700 boards out there. They are selling for 399 now.