Avacado

ETH can have all the effects it wants after I finish paying for every piece of tech in my house (I'm close).

I wish brother, I wish. Tesla's only get about 3 MH/s each. Not worth it, which kills me because https://www.betterhash.net/NVIDIA-TITAN-X-(Pascal)-mining-profitability-9981235.html#:~:text=NVIDIA TITAN X (Pascal) can,- Ethash (Phoenix) algorithm.

Show off. ?

More cowbell. Needs more cowbell.

That picture needs more cowbell.

From a medical standpoint, this is great! It's well known that in 50 years or less, there won't be a need for doctors anymore as AI will be able to do it just fine.

As long as it stays <85c, you should maintain boost clocks. The M.2. Sinks are a great idea, though I am not entirely convinced that the backplates are metal alloy. I am pretty sure all of mine were hard plastic. That is one of the reasons I bought backplates, I didn't see the rational with thermal pads on the back try to move heat through plastic. I was just curious to which model you got a hold of as I know that the 24GB models are out there, should not make a difference.

This is exactly what I plan to do. Just didn't want to have to do it.

Hey, all, you, guests, don't be shy, we don't bite, hard..... Don't be shy, sign up and be accepted into the fam, fam.

Been working on the system tonight, got to leak testing. Unfortunately so far it's not holding air pressure. It is a VERY slow leak, but enough to drive me nuts. A few of the G1/4 threads on the rads aren't creating a tight seal with my QDC's or the one slot I had for my thermal probe (Seems like a thread issue). This is very un-settling as I probably have over 30 G1/4 threaded ports to check and I would have to disassemble the case in a way that is most inconvenient . This thing is taking waaaaay longer than I had planned, but they always do. I hate to do something I frown upon, but I might just fill her with distilled and find the leak to narrow it down. Change log 05/12/21: - Rad array panel completed. - Casters added to base - Loop completed. - Leak testing begun. *Note the GPU sag is a lot less with the side panels connected. There is nothing preventing them from moving without the side panels connected. I will try to fix this in the future.

Alright, thank you for the feedback. That SM8 is a beast. I do have a white TH10a saved for a rainy day.

Just so you know, there are thermal pads under that backplate there. 0.5mm. Is yours the 12 or 24 GB variant?

And when you get there, you better stop by and say hi, I'm only a 3 hour drive from Atlanta. @Supercrumpet You live in Clemson? That's even closer.

Do what I do, run them vertical or if you can't run parallel water bridges to spread out the weight ?

I have been getting asked about potentially selling my labs s8s over on OCN. I know that they are now collectors items and the prices are through the roof. I won't tell just what I paid for it yet, looking to get your opinions on the poll.

Why didn't the power go out on that huh? It needs to.

Lets plan this build out. Cardboard makes for great case material.

Got 3 TR's already 2x1900x 1x2950x, what in gods name are you trying to do to me????? damn you Damric ? Still makes no sense, 1 Tesla M40 makes the same PPD as the 2950x and if you use all the cores, there are no lanes left for any other GPU's.

I have a z270 8700k delided or a z390 9700k I can part with if you are buying.

I thought about your issue with the 16x risers, the only thing I can think of is the risers are preventing the normal 75w delivered via the slot. Might be why your 1x risers are working while the 16x ones aren't. Just a thought. Shielded vs un-shielded cabling could also be effecting it if un-shielded.

So it's confirmed now? Source

In'ish. I'll put the Tesla's on the tourney, but the mining is too good and my wife is making me recoup all of the tech debt I have, so.... ?

Source