bonami2

13900k arrived and installed. How this would be for cleaning? Blitz part 2 not avalaible. Just a moment... WWW.DAZMODE.COM

Wonder when they are going to make a game with that kind of engine Flight Simulator is just insane. One days i will buy it

Oh yea well for suround it doest really matter.

https://www.amazon.ca/dp/B092LZNZB7?ref_=cm_sw_r_cp_ud_dp_5YPAVFA5RJ6A0SEJM45B&th=1 https://www.amazon.ca/dp/B08BZXPKFY?ref_=cm_sw_r_cp_ud_dp_21G2JQTC4YD888E59RPN One is 60hz i think not sure other is 120hz

Should have used TYPE C connector. I mean it good up to like 240w just need 4

Nah they are really 1000$ canadian dollar on amazon for some reason from two random seller.

Oled c1 48 are now 1000$ cad time for surround

How true forgot about that. Was thinking about it when i received it and forgot. Well can still do it with the fan just heavier Will flush it with water. And when i got pump res will run it for a days or two and flush again with distilled. In case of leak.

Congrat all

Welcome

800 + tax in canadian so about 915$ i think. But i sold my 12700k for like 400$ so not too bad for 2x the core count and cache. No idea it still says backordered even though i ordered last month

Source : https://videocardz.com/newz/massive-quad-slot-cooler-for-unreleased-900w-geforce-rtx-40-gpu-has-been-pictured Source Picture : https://www.chiphell.com/thread-2452314-1-1.html

Thank you Will look into those coupling for sure i don't think they have the size i need sadly. For the flow meter since my block is Acrylic i should be able to see the flow no? Trying to keep cost down. Am not too worried about overheating or pump failure. Thank you for the chart never knew you could mix it by temp Probably will run 50/50 since am lazy.

Did not even see that part of your post. The restriction i have read about was internal tubing. Can't says if it good source though. For fan i people seemed to says they where close enough to not require push pull. Another note the Alphacool is almost half the price.

Thank you alot for the help and picture! Seem like the Quick Disconnect Fitting will be too big for my usage. At worst i can just remove cpu block because for now it only cpu cooling. Tried finding your tubing in canada and we do have those but they only sell at 50ft. Found some EPDM from EK that should be alright. For fitting i think those could fit. Not too sure if am missing part without having the pump and tubing in front of me to figure it. https://www.dazmode.com/shop/watercooling/fittings/soft-tube-fittings/12-34-compression-fittings/12id-34od-straight-compression-fitting-silver-bp-cpf-cc5/ https://www.dazmode.com/shop/watercooling/fittings/soft-tube-fittings/12-34-compression-fittings/90-degree-swivel-angled-for-13mm-x-19mm-12in-x-34in/ One koolance the other is bitpower. 2x block 2x pump 2x rad i think am not missing anything just need to figure if i really need swivel. For coolant kinda want to use CAR COOLANT since if i ever have a power shutdown in the winter i don't want everything to blow up. EPDM should handle it. But my acrylic block not sure. Last part is figuring how am suppose to fit the Res/pump to the radiator

TeamGroup Launches T-Force SIREN DUO360 ARGB AIO Cooler, The First Dual "CPU+SSD" Water Block Design WCCFTECH.COM TeamGroup has announced the launch of its T-Force SIREN DUO360 ARGB, offering AIO cooling to both CPU & SSD in a dual water block design.

I read somewhere the Mo-Ra is more restrictive than for example this https://www.watercoolinguk.co.uk/p/Alphacool-NexXxoS-XT45-Full-Copper-1080mm-Nova-Radiator_76518.html There a XT60 variant but it not in stock or a 1260mm xt45 too. Review are really good for the p12 fan so i went with this too. For fan control. I just ordered a PCI Fan controller and going to try to wire it via a external power supply so i got like 10 fan head and a potentiometer ajustment.

Update Ordered a Byskski Block nickel plated. And some feet for the radiator. And fan

This build look great!!! Meanwhile am lazy and i went with a beelink box with a ryzen 5650u 6 core and 64gb ddr4 sodimm. This Nas look better than my main build am jealous Cable management = 10\10

Don't worry too much. My 6800M aka 6700xt Mobile is bullet proof driver wise never had any issue! My 6800XT is another story but i think it a sapphire issue not amd. Just realised everytime i get issue is with sapphire still run fine anyways pushing 4k 120hz

Happy to help as much as i can we are a familly

Good idea that what am trying to find on amazon but i think il go to the store this week. Am thinking of installing it either in my windows or on top of the case but am worried about leak on top. Thank you alot Am doing this for the performance and not really the look so am not too worried. I read a little about the fitting thing. Need to figure where i can get those to canada and figure tubing size that go with it.

Thank you all for the support! Sold on the p12. Gonna use rubber stick feet for the rad i think it should work it so heavy it won't tip off and i don't have any cat or kid! Big thank you to Avacado

Hello all! Am starting my first External Watercooling setup and will need some advice on the setup and part list Here my build: Intel 13900k Waiting to receive it! OLOY 4000mhz cl14 gear 1 2x16gb Sapphire 6800XT Msi Z690 A Pro Now to the part list: Radiator: Alphacool NexXxoS UT60 1080mm Fan: Arctic P12 120mm Radiator Feet: Some aliexpress Radiator Feet i ordered aluminium for 20$. Waterblock LGA 1700: Ordered a byskski block from Aliexpress. For 45$ it nickel and acrylic. Seem like nickel and copper work together? Fitting: Bitspower PUMP and Res combo : Thermaltake D5 External Fan Controller? Custom Power Supply with a fan controller.