got a little Eth rig...finally

[Cerberus]

after paying $850/card my friend and I managed to finally get 6x  cards online

https://ethermine.org/miners/42Ce8BC8d38355222f06B318Ab3bF784AE837C43/dashboard

[Avacado]

Legit! Numbers look good. What is that last card?. I get 240MH/s with the 4 2080 Ti's. 

 

Try -300 core, 1000 MEM OC @ 65-75% PL. Then they'll fly. 

Edited February 22, 2021 by Avacado

[Cerberus]

2 minutes ago, Avacado said:

Legit! Numbers look good. What is that last card?. I get 240MH/s with the 4 2080 Ti's. 

 

Try -300 core, 1000 MEM OC @ 65-75% PL. Then they'll fly. 

at 52%pl -200/+1250 on all ~140w about 61MH/ea

 

all 3070s

[Avacado]

1 minute ago, Cerberus said:

at 52%pl -200/+1250 on all ~140w about 61MH/ea

 

all 3070s

Not bad, almost identical to my Ti's 

[Avacado]

Could do a lot of damage in the F@H tourney right now if you wanted

[Cerberus]

2 minutes ago, Avacado said:

Could do a lot of damage in the F@H tourney right now if you wanted

i know but partner dosent want to, i threw my 1080ti at the comp tho

[Avacado]

Just now, Cerberus said:

i know but partner dosent want to, i threw my 1080ti at the comp tho

I hear that. I debated as well. Will lose 200$ on mining income this week to support the comp. 

[Sir Beregond]

Dang. Where did you get those for $850?

 

Would it be worth trying some mining with a single 3070?

[Avacado]

8 minutes ago, Sir Beregond said:

Dang. Where did you get those for $850?

 

Would it be worth trying some mining with a single 3070?

You tell me. Looks like ROI @ 850$ would be 4 months. 

 

https://whattomine.com/

 

Edited February 22, 2021 by Avacado

[Sir Beregond]

I should actually see if I can lookup how much exactly I am paying for power to get proper numbers, but that looks great. Recoop some of the rig costs.

[Avacado]

Just now, Sir Beregond said:

I should actually see if I can lookup how much exactly I am paying for power to get proper numbers, but that looks great. Recoop some of the rig costs.

Thats why iv'e been mining. Only been doing it for 5 weeks and I have about 0.80 ETH. Not bad. 

[Odyn]

On 2/22/2021 at 7:26 AM, Cerberus said:

at 52%pl -200/+1250 on all ~140w about 61MH/ea

 

all 3070s

I have my 6 @:
125w power limit, 100% fan, 0 core, 2600mem.

 

I get 62.8mhs per card.

Where did you end up getting your cards at? Matching sets are rare.

 

 

[Bastiaan_NL]

That's a nice set of 3070's @Cerberus!
I understand the purpose of this build, but like @Avacado said it would make a nice folding system

[BWG]

On 2/22/2021 at 7:11 AM, Cerberus said:

after paying $850/card my friend and I managed to finally get 6x  cards online

https://ethermine.org/miners/42Ce8BC8d38355222f06B318Ab3bF784AE837C43/dashboard

 

Wow, what a potentially great folding system

[T.Sharp]

Been a while since I've mined and I used to use Nvidia Inspector to set the OC and power limit for each card. Is it possible to use Afterburner with multiple cards and manually set the voltage / frequency point with the curve editor?

It should allow for more power savings compared to just setting PL and underclocking the core, since underclocked core means you're running higher voltage than is needed to keep it stable. 

I think mining apps still run the GPU in P2 power state with downclocked memory, meaning you need to apply a larger mem offset to reach the same speed you would see in 3D workloads. Is that still the case? 

Edited March 24, 2021 by T.Sharp

[Avacado]

17 minutes ago, T.Sharp said:

Been a while since I've mined and I used to use Nvidia Inspector to set the OC and power limit for each card. Is it possible to use Afterburner with multiple cards and manually set the voltage / frequency point with the curve editor?

It should allow for more power savings compared to just setting PL and underclocking the core, since underclocked core means you're running higher voltage than is needed to keep it stable. 

I think mining apps still run the GPU in P2 power state with downclocked memory, meaning you need to apply a larger mem offset to reach the same speed you would see in 3D workloads. Is that still the case? 

Yes to the afterburner question. I use EVGA X1. Yes, you will want to OC your MEM. 

[Cerberus]

swtiched from phoenixminer 5.5c to T-Rex 0.19.14 and my  average reported hashrate jumped 38MH/s, woo!

[BWG]

While you're chasing hashrates, I'll take this 9 spot, thanks! 

 

[Cerberus]

11 minutes ago, BWG said:

While you're chasing hashrates, I'll take this 9 spot, thanks! 

 

after I move this summer, dont worry, it will be on

[BWG]

1 hour ago, Cerberus said:

after I move this summer, dont worry, it will be on

 

After you move this summer, I will have 8 3090's folding.  

[Bastiaan_NL]

18 hours ago, Cerberus said:

swtiched from phoenixminer 5.5c to T-Rex 0.19.14 and my  average reported hashrate jumped 38MH/s, woo!

That's a nice free jump! 

 

7 hours ago, BWG said:

 

After you move this summer, I will have 8 3090's folding.  

And a few solar panels to power them and the ac? 4kwh is no joke