Jump to content

Welcome to ExtremeHW

Welcome to ExtremeHW, register to take part in our community, don't worry this is a simple FREE process that requires minimal information for you to signup.

 

Registered users can: 

  • Start new topics and reply to others.
  • Show off your PC using our Rig Creator feature.
  • Subscribe to topics and forums to get updates.
  • Get your own profile page to customize.
  • Send personal messages to other members.
  • Take advantage of site exclusive features.
  • Upgrade to Premium to unlock additional sites features.
IGNORED

The Great Tesla M40 Adventure "Projeckt T3sla"


Avacado
8 Attachments
Go to solution Solved by Avacado,

Recommended Posts

Premium Platinum - Lifetime
16 hours ago, Avacado said:

Finally finished mounting all 5 GPU blocks. Just waiting on the racks to arrive. Time to flex some of the hard work. 

 

20210419_200849.thumb.jpg.47c48dfde64d5e011a8f60b432a03276.jpg

20210419_201024.thumb.jpg.7d305f763314ce0a13cf2355ecc3ef0b.jpg

20210419_201056.thumb.jpg.a53be1134df8d70bce9f245d0a5ba879.jpg

20210419_201304.thumb.jpg.f4602e1a8cc941c9faf54b9ccb6182e0.jpg

Now I know why it takes so long for them to make a block for my 3090, they've been busy making all those parts for you! :classic_laugh:

But it's looking really good, can't wait for the next update!

Link to comment
Share on other sites

Just now, Bastiaan_NL said:

Now I know why it takes so long for them to make a block for my 3090, they've been busy making all those parts for you! :classic_laugh:

But it's looking really good, can't wait for the next update!

Ha! Doubt it, I literally had to blow some dust off of them when they arrived. I don't think there has been a demand for 980Ti blocks in quite some time. 

Link to comment
Share on other sites

Premium Platinum - Lifetime
22 minutes ago, Avacado said:

Ha! Doubt it, I literally had to blow some dust off of them when they arrived. I don't think there has been a demand for 980Ti blocks in quite some time. 

Let alone 5 at once.. :classic_laugh:

Edited by Bastiaan_NL
  • Thanks 1
Link to comment
Share on other sites

7 hours ago, Avacado said:

Came across this.

 

Tesla.thumb.png.bde3b771bc6d447290c413a391055272.png

 

Seeing as how there is nothing there and there is nothing to lose, challenge accepted @ENTERPRISE??!!??!!??

 

Accepted ! Not sure how far I will be able to push mine as they will be on air, but we will see.

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro SE Gen 5 4TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: 2x WD RED 1TB NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

1 hour ago, Bastiaan_NL said:

Now I want an M40 too and join the cool guys! :classic_cool:

 

No.gif

 

A picture was leaked of @Bastiaan_NL Folding GPU collection.

 

Bas.thumb.jpg.ad27dc47f007906e85f87ede4a73cdbd.jpg

 

Edited by Avacado
Link to comment
Share on other sites

Folding@Home Staff

Which one's Mom's?

3.50

Owned

 Share

CPU: 5600x
GPU: EVGA RTX 3090 FTW3 Ultra
GPU 2: EVGA RTX 3080ti FTW3 Ultra
GPU 3: EVGA RTX 3080ti XC3 Hybrid
GPU 4: EVGA RTX 3070ti FTW3 Ultra
GPU 5: MSI RTX 3070 Gaming X Trio
GPU 6: Asus RTX 2080ti ROG STRIX
GPU 7: EVGA RTX 3080ti FTW3 Ultra
Full Rig Info
Link to comment
Share on other sites

Premium Platinum - Lifetime
30 minutes ago, Avacado said:

 

No.gif

 

A picture was leaked of @Bastiaan_NL Folding GPU collection.

If only... 
But now I know where the EVGA PSU's went :classic_blink:

 

23 minutes ago, BWG said:

Which one's Mom's?

Hard to tell what is what on that picture, but I'm sure it must be there somewhere :classic_laugh:

Link to comment
Share on other sites

One of the 3 cases came in last night. This case will replace the open air rig housing the air cooled Teslas. I got busy using the trim on all the razor sharp edges, I must say it makes a world of difference. The case did not come with any feet, so I drilled into it and will be recycling the feet from the Meshify C that I saved. They are a perfect height, though I had to dremel each of them to get a  little bump to allow them to be flush.  

 

2115991605_AirCase.thumb.jpg.2067add5f261b8d69d5027dfd8ebe599.jpg

 

1059204129_AirCaseTrim.thumb.jpg.ac9cb093252eda34d011481eb9023ffa.jpg

 

1826959213_AirCaseFeet.thumb.jpg.d985dc3de3553a819d24826be1eabe22.jpg

Edited by Avacado
  • Thanks 1
Link to comment
Share on other sites

Folding@Home Staff
16 minutes ago, Avacado said:

One of the 3 cases came in last night. This case will replace the open air rig housing the air cooled Teslas. I got busy using the trim on all the razor sharp edges, I must say it makes a world of difference. The case did not come with any feet, so I drilled into it and will be recycling the feet from the Meshify C that I saved. They are a perfect height, though I had to dremel each of them to get a  little bump to allow them to be flush.  

 

2115991605_AirCase.thumb.jpg.2067add5f261b8d69d5027dfd8ebe599.jpg

 

1059204129_AirCaseTrim.thumb.jpg.ac9cb093252eda34d011481eb9023ffa.jpg

 

1826959213_AirCaseFeet.thumb.jpg.d985dc3de3553a819d24826be1eabe22.jpg

 

I have some extra rubber feet that has a screw in the middle from replacing the ones on my couch if those don't work. They're adjustable. I leveled my gpu tray out with them.

3.50

Owned

 Share

CPU: 5600x
GPU: EVGA RTX 3090 FTW3 Ultra
GPU 2: EVGA RTX 3080ti FTW3 Ultra
GPU 3: EVGA RTX 3080ti XC3 Hybrid
GPU 4: EVGA RTX 3070ti FTW3 Ultra
GPU 5: MSI RTX 3070 Gaming X Trio
GPU 6: Asus RTX 2080ti ROG STRIX
GPU 7: EVGA RTX 3080ti FTW3 Ultra
Full Rig Info
Link to comment
Share on other sites

...at first, I thought I was looking at an older BMW M5 V10 block ?

  

AvBlock.jpg.c817c80c432d9d4943761aea06a79ecc.jpg

Owned

 Share

CPU: CPU: ><.......7950X3D - Aorus X670E Master - 48GB DDR5 7200 (8000) TridentZ SK Hynix - Giga-G-OC/Galax RTX 4090 670W - LG 48 OLED - 4TB NVMEs >< .......5950X - Asus CH 8 Dark Hero - 32GB CL13 DDR4 4000 - AMD R 6900XT 500W - Philips BDM40 4K VA - 2TB NVME & 3TB SSDs >> - <<.......4.4 TR 2950X - MSI X399 Creation - 32 GB CL 14 3866 - Asus RTX 3090 Strix OC/KPin 520W and 2x RTX 2080 Ti Gigabyte XTR WF WB 380W - LG 55 IPS HDR - 1TB NVME & 4TB SSDs
Full Rig Info
Link to comment
Share on other sites

56 minutes ago, Bastiaan_NL said:

That's a nice windtunnel you have there, I bet the Tesla's will love those 5 fans blowing right into their intake fan :classic_biggrin:

For sure. And over the next few years, it will make a great open air WC chassis as I find newer cards and phase out the Teslas. 

43 minutes ago, J7SC_Orion said:

...at first, I thought I was looking at an older BMW M5 V10 block ?

  

AvBlock.jpg.c817c80c432d9d4943761aea06a79ecc.jpg

Ha! Yea I can see that, a V10 block would be a great WC chassis idea. Seriously though, I LOVE the trim from https://www.mnpctech.com/products/u-channel-rubber-trim

 

I love it so much, I bought another 50 ft of small and 50 ft of wide trim. Going to use the hell out of it.

Edited by Avacado
  • Thanks 1
Link to comment
Share on other sites

Excited, the mountain mods case should be here courtesy of Fedex tomorrow and I will finally have everything I need to build. Got the feet installed and they work out great, it's nice being able to recycle salvaged parts. Got the I/O plates installed on the Tesla's, they are all ready to install. Figuring maybe next weekend will be the time as I have my daughter this weekend. 

 

IO.thumb.jpg.b6bd009cbe327689b6db0afed3bf3a97.jpg

 

Feet.thumb.jpg.cf82b4758f5238fb0fcfb917e7a57b12.jpg

  • Thanks 1
Link to comment
Share on other sites

Well looky what just came. For some reason, I swore I ordered black. But oh well. We will see how this monster looks with pedestal. This case is HUGE. There are so many configs for water cooling.

 

20210501_124540.thumb.jpg.5a4fa3dec93516c861dea3c181918671.jpg

 

20210501_142304.thumb.jpg.880c634028e2b9856dceb65989e5bb7a.jpg

 

Build party, dungeon, BYOB. 

  • Thanks 2
Link to comment
Share on other sites

2 hours ago, Bastiaan_NL said:

That is massive, what are the dimensions? 

And I thought the other case was a windtunnel, when fully rigged up with fans this thing will blow the caps from the motherboard :classic_laugh:

45cmx46cmx61cm.

Link to comment
Share on other sites

So far so good. The dual 7" screens fit perfect, I couldn't figure out how I was going to secure them, luckily I don't have to. I will decide whether or not to fill that gap at the top, will involve measuring and cutting some of the aluminum sheets I have. 

 

 20210501_200629.thumb.jpg.fc1c461ee84423fc6d91ca1737e3e697.jpg

Link to comment
Share on other sites

Interestingly enough, this is my first soft tube build, I started with hardline. I must say my OCD hates it, but my practical side loves having the QDC's. 

 

05/03/21 Change Log:

 

- 7 GPU's total; 5 Tesla M40's, 1 Quadro 4000, 1 GT710. 

 

- 2x1000w Super Flower Titanium PSU's mounted.

- AC D5 with BP 100ml res & Swiftech D5/EK topper mounted.

- Pump out temp 5 micron filter added.

- GPU tube run completed.

- Fans mounted to 2xAcool ST30's, 1 Acool XT45 360 rads. 

- Quadro 4000 position changed to accommodate res, 2x 3 ft HDMI and HDMI to DP converters arrived. The Q4k will be driving the 2 screens on the front of the case. 

 

20210503_213545.thumb.jpg.22ba8fe371a25716988fa85afed6c8b1.jpg

20210503_213801.thumb.jpg.7354045d2939b8937b790cce92b7f050.jpg

 

I thought this case was huge, however It will be VERY full by the time I'm done with it. Stay tuned. More work coming this weekend. I plan to get the loop together for air leak testing prior to wiring anything. 

 

  • Thanks 2
Link to comment
Share on other sites

7 hours ago, Avacado said:

Interestingly enough, this is my first soft tube build, I started with hardline. I must say my OCD hates it, but my practical side loves having the QDC's. 

 

05/03/21 Change Log:

 

- 7 GPU's total; 5 Tesla M40's, 1 Quadro 4000, 1 GT710. 

 

- 2x1000w Super Flower Titanium PSU's mounted.

- AC D5 with BP 100ml res & Swiftech D5/EK topper mounted.

- Pump out temp 5 micron filter added.

- GPU tube run completed.

- Fans mounted to 2xAcool ST30's, 1 Acool XT45 360 rads. 

- Quadro 4000 position changed to accommodate res, 2x 3 ft HDMI and HDMI to DP converters arrived. The Q4k will be driving the 2 screens on the front of the case. 

 

20210503_213545.thumb.jpg.22ba8fe371a25716988fa85afed6c8b1.jpg

20210503_213801.thumb.jpg.7354045d2939b8937b790cce92b7f050.jpg

 

I thought this case was huge, however It will be VERY full by the time I'm done with it. Stay tuned. More work coming this weekend. I plan to get the loop together for air leak testing prior to wiring anything.  This may have been put elsewhere but I assume the screens are for stat monitoring ? If so will you use something like AIDA64's sensor panel ?

 

Jealous ! Looking awesome man, love the case, certainly affords for some great cooling and configuration.

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro SE Gen 5 4TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: 2x WD RED 1TB NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy