Jump to content

Welcome to ExtremeHW

Welcome to ExtremeHW, register to take part in our community, don't worry this is a simple FREE process that requires minimal information for you to signup.

 

Registered users can: 

  • Start new topics and reply to others.
  • Show off your PC using our Rig Creator feature.
  • Subscribe to topics and forums to get updates.
  • Get your own profile page to customize.
  • Send personal messages to other members.
  • Take advantage of site exclusive features.
  • Upgrade to Premium to unlock additional sites features.
IGNORED

Interesting issue with networking ports.


Recommended Posts

So, i recently upgraded from a 100/10 line (fast but not fast enough) to a 1.5gbps/980mbps fiber line through my ISP (Bell Canada) the new modem they brought has a 10gbps port on it. i figured perfect, my pc has a 2.5gbps intel network card in it. so ill get full speed. i was wrong.

 

symptoms as follows :

 

Plugged into 10G port on modem Via CAT7 cable:

 

1. inconsistent speedtest speeds, nowhere near half of my rated internet speed, choppy on both upload and download

2. same inconsistency shown while downloading anything, gaming is fine and latency to servers is extremely low

3. steam will use the full speed for about 15 seconds on a large game download. them drop right to 0, no disk activity either, then pick back up (not a write bottleneck, steam is pointed at an M.2 PCIe SSD)

 

Plugged into a 1G standard port on the modem via same cat 7 cable:

 

1. more consistent download upload speeds showing 930mbps/910mbps

2. downloading from browser is fine, so is other game launchers, gaming and latency remain fine and low

3. steam performs more consistently, but still only pulls around 250-300mbps before dropping to 0 in the same fashion as before

 

the problem with option 2 is it caps me below 1gbps so i dont overload the port, and steam is just annoying both ways, and option 1 would be great if it actually got to speeds its rated for, and the cable is brand new, i installed it today. its also a 50 foot cable, which even cat5e would handle theoretically for my internet speed.

 

any insight into this would be great, as its annoying me to no end that i cant make the 10G port behave and do its job. and that steam is this broken is beyond me.

 

EDIT: Issue solved, defective hardware from bell, new modem on the way.

Edited by PCSarge

Owned

 Share

CPU: AMD R7 7800X3D
GPU: AMD RX Sapphire 7800XT Pure
MOTHERBOARD: MSI B650M Project Zero
RAM: Corsair Dominator Platinum 64GB 32-38-38 @ 6200mhz
SSD/NVME: Sabrent Rocket NVMe 500GB (Windows)
SSD/NVME 2: WD Black SN850X 4TB (Games)
SSD/NVME 3: Cruicial MX 500 2TB (Programs)
SSD/NVME 4: Crucial MX 300 1TB (Documents/Downloads)
Full Rig Info

Owned

 Share

CPU: Xeon 5345 @ 2.3GHZ
CPU 2: Xeon 5345 @ 2.3GHZ
MOTHERBOARD: Intel S5000PSL E-ATX
RAM: 32GB Hynix ECC DDR2 667Mhz
CPU COOLER: 2x Dynatron 2U Heatsinks
SSD/NVME: Samsung 840 EVO 120GB
HDD: Seagate Firecuda Compute 2TB
OPERATING SYSTEM: Winodws Server 2019 Standard
Full Rig Info
Link to comment
Share on other sites

  • 1 month later...

Yeah I was going to say that sounds like an auto negotiation issue with the router, that or it was just straight up cappy ISP hardware lol. 

 

Only just seen this thread. Did your replacement work out ?

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro SE Gen 5 4TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: 2x WD RED 1TB NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

36 minutes ago, ENTERPRISE said:

Yeah I was going to say that sounds like an auto negotiation issue with the router, that or it was just straight up cappy ISP hardware lol. 

 

Only just seen this thread. Did your replacement work out ?

ironically it took 2 replacements to get a working one. they also dont want the broken ones back because "covid" 

 

first one sent back was dead 10G ports, only 1G worked.

Second one had a dead fiber port, no signal coming into it.

3rd refused firmware update and bricked itself.

4th one worked fine once i got it hooked up and my ISP login info put into it.

Edited by PCSarge

Owned

 Share

CPU: AMD R7 7800X3D
GPU: AMD RX Sapphire 7800XT Pure
MOTHERBOARD: MSI B650M Project Zero
RAM: Corsair Dominator Platinum 64GB 32-38-38 @ 6200mhz
SSD/NVME: Sabrent Rocket NVMe 500GB (Windows)
SSD/NVME 2: WD Black SN850X 4TB (Games)
SSD/NVME 3: Cruicial MX 500 2TB (Programs)
SSD/NVME 4: Crucial MX 300 1TB (Documents/Downloads)
Full Rig Info

Owned

 Share

CPU: Xeon 5345 @ 2.3GHZ
CPU 2: Xeon 5345 @ 2.3GHZ
MOTHERBOARD: Intel S5000PSL E-ATX
RAM: 32GB Hynix ECC DDR2 667Mhz
CPU COOLER: 2x Dynatron 2U Heatsinks
SSD/NVME: Samsung 840 EVO 120GB
HDD: Seagate Firecuda Compute 2TB
OPERATING SYSTEM: Winodws Server 2019 Standard
Full Rig Info
Link to comment
Share on other sites

3 hours ago, PCSarge said:

ironically it took 2 replacements to get a working one. they also dont want the broken ones back because "covid" 

 

first one sent back was dead 10G ports, only 1G worked.

Second one had a dead fiber port, no signal coming into it.

3rd refused firmware update and bricked itself.

4th one worked fine once i got it hooked up and my ISP login info put into it.

Still curious if steam still has the issue with dropping to 0 then starting back up. I'm in the US with a 400Mbps service and I test over 400 consistantly for my download speeds, but Steam does the same thing to me whenever I have an update or a new game to download.Almost like they cut people off to let others in because they aren't sure they have enough resources...

Link to comment
Share on other sites

8 hours ago, PCSarge said:

ironically it took 2 replacements to get a working one. they also dont want the broken ones back because "covid" 

 

first one sent back was dead 10G ports, only 1G worked.

Second one had a dead fiber port, no signal coming into it.

3rd refused firmware update and bricked itself.

4th one worked fine once i got it hooked up and my ISP login info put into it.

Wow, kooks like they need to get some better QA on those units. Glad you got it sorted though. 

4 hours ago, schuck6566 said:

Still curious if steam still has the issue with dropping to 0 then starting back up. I'm in the US with a 400Mbps service and I test over 400 consistantly for my download speeds, but Steam does the same thing to me whenever I have an update or a new game to download.Almost like they cut people off to let others in because they aren't sure they have enough resources...

I mean while im sure Steam has bandwidth up the wazoo ..they could be doing some traffic shaping to ensure the bandwidth is dished out fairly.

  • Thanks 1

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro SE Gen 5 4TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: 2x WD RED 1TB NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

18 hours ago, schuck6566 said:

Still curious if steam still has the issue with dropping to 0 then starting back up. I'm in the US with a 400Mbps service and I test over 400 consistantly for my download speeds, but Steam does the same thing to me whenever I have an update or a new game to download.Almost like they cut people off to let others in because they aren't sure they have enough resources...

yes steam has that issue, it caps me at about 500 ish downloading. then cuts me to zero for a couple minutes and starts again.

 

the way to mitigate it is to set the download speed to what you see your max drive write speed hit in steam, then it doesnt stop downloading

Edited by PCSarge
  • Thanks 2

Owned

 Share

CPU: AMD R7 7800X3D
GPU: AMD RX Sapphire 7800XT Pure
MOTHERBOARD: MSI B650M Project Zero
RAM: Corsair Dominator Platinum 64GB 32-38-38 @ 6200mhz
SSD/NVME: Sabrent Rocket NVMe 500GB (Windows)
SSD/NVME 2: WD Black SN850X 4TB (Games)
SSD/NVME 3: Cruicial MX 500 2TB (Programs)
SSD/NVME 4: Crucial MX 300 1TB (Documents/Downloads)
Full Rig Info

Owned

 Share

CPU: Xeon 5345 @ 2.3GHZ
CPU 2: Xeon 5345 @ 2.3GHZ
MOTHERBOARD: Intel S5000PSL E-ATX
RAM: 32GB Hynix ECC DDR2 667Mhz
CPU COOLER: 2x Dynatron 2U Heatsinks
SSD/NVME: Samsung 840 EVO 120GB
HDD: Seagate Firecuda Compute 2TB
OPERATING SYSTEM: Winodws Server 2019 Standard
Full Rig Info
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy