Needing link for Tygon

[Avacado]

I previously ordered some Tygon from US plastics, however the thickness of the tubing almost instantly kinks due to how thin it is. Can someone please link me Black Tygon that will fit 16/10mm soft tubing barbs with the thickest sidewalls? I spent 20 minutes browsing US plastics and I got all turned around. I think it equates to 3/8ID x 5/8OD (You know how imperial to metric never equals out right). 

Edited May 27, 2022 by Avacado

[damric]

I ordered some vinyl that size from Amazon but I have not used it yet.

 

I also looked at US plastics but they ask a lot for shipping.

[Sir Beregond]

This? 

3/8" ID x 5/8" OD x 1/8" Wall Tygon® A-60-G Industrial Grade Tubing | U.S. Plastic Corp.

WWW.USPLASTIC.COM

---

This tubing outperforms neoprene, EPDM, and other general-purpose tubing. It has a wide range of applications such as gaskets, abrasion-r...

 

[Avacado]

1 minute ago, Sir Beregond said:

This? 

3/8" ID x 5/8" OD x 1/8" Wall Tygon® A-60-G Industrial Grade Tubing | U.S. Plastic Corp.

WWW.USPLASTIC.COM

---

This tubing outperforms neoprene, EPDM, and other general-purpose tubing. It has a wide range of applications such as gaskets, abrasion-r...

 

1/8" wall that's 0.125mm I think that is what I have already. I didn't know if there was thicker. I will run down to the dungeon and use my calipers on what I have. 

[Sir Beregond]

Out of the 3 options they have for 3/8" ID tubing if just using barbs and not compressions, that seems to be the thickest wall.

 

[Avacado]

3 minutes ago, Sir Beregond said:

Out of the 3 options they have for 3/8" ID tubing if just using barbs and not compressions, that seems to be the thickest wall.

 

Well it sucks compared to how mayhems bends then. In my experience soft tube compression fittings still use barbs, just not clamps.

 

 

Edited May 27, 2022 by Avacado

[Sir Beregond]

2 minutes ago, Avacado said:

Well it sucks compared to how mayhems bends then.

 

 

 

I don't think that Tygon is 3/8" ID 5/8" OD. A 1/8 of an inch wall would equate to 3.175mm, closer to the Mayhems reading.

Edited May 27, 2022 by Sir Beregond

[Avacado]

Just now, Sir Beregond said:

 

I don't think that Tygon is 3/8" ID 5/8" OD. A 1/8 of an inch wall would equate to 3.175mm

Interesting, you might be right. 

[Avacado]

Damn, good call. It's neoprene. So weird though. I know I bought it from US plastics awhile back and could have sworn it was Tygon. Never checked it until tonight... Derp. 

Edited May 27, 2022 by Avacado

[Sir Beregond]

If I had to guess, I'd guess what you have is the 3/8" ID 1/2" OD Tygon.

 

Edit: Ah, so its not Tygon either? Yeah. I think if you order the 3/8" ID 5/8" OD Tygon, you'll be much happier. 

Edited May 27, 2022 by Sir Beregond

[Avacado]

1 minute ago, Sir Beregond said:

If I had to guess, I'd guess what you have is the 3/8" ID 1/2" OD Tygon.

Good looking out Beregond. I'll have to place an order then. 

Edited May 27, 2022 by Avacado

[Sir Beregond]

Just now, Avacado said:

Good looking out Beregond. I'll have to place an order then. 

Cheers, glad I could help. I only use 3/8" ID 5/8" OD for my soft tubing these days precisely because its a thick wall.

[Avacado]

1 minute ago, Sir Beregond said:

Cheers, glad I could help. I only use 3/8" ID 5/8" OD for my soft tubing these days precisely because its a thick wall.

Same. That's why I was pissed when I finally opened it. 

[Fluxmaven]

4 hours ago, Avacado said:

Damn, good call. It's neoprene. So weird though. I know I bought it from US plastics awhile back and could have sworn it was Tygon. Never checked it until tonight... Derp. 

 

What you have probably is some variation of Tygon if you bought it from US Plastics. 

 

You just had some really thin wall stuff. Here's some pics of my  B I G  CHUNGUS 1/2x3/4" Tygon Norprene. It just says Norprene on the tubing itself, but it is Tygon A-60-G. 

 

The name is similar but Norprene ≠ Neoprene.