Jump to content

Welcome to ExtremeHW

Welcome to ExtremeHW, register to take part in our community, don't worry this is a simple FREE process that requires minimal information for you to signup.

 

Registered users can: 

  • Start new topics and reply to others.
  • Show off your PC using our Rig Creator feature.
  • Subscribe to topics and forums to get updates.
  • Get your own profile page to customize.
  • Send personal messages to other members.
  • Take advantage of site exclusive features.
  • Upgrade to Premium to unlock additional sites features.
IGNORED

The Industry by Tpbmods


Tpbmods

Recommended Posts

Well here we are, Just like 2019, The Industry is finally done!

It's been a long and fruitful journey this year; and I cant wait to show everyone what I have in works for 2020.

I want too give my greatest appreciation to Inwin USA, EK Waterblocks, TeamGroup and Dazmode for their continued support.

And I want to thank each and every one of you for following along on this journey of mine, It means a lot to me!

 

System specs:

Case: Inwin 905, CNC'd by @PartyBrosDesign

Cpu - Intel i7 8700k

Mobo - Maximus Formula z370

Gpu - Strix 2080

Ram - 16gb (4x4) TeamGroup T-Force DarkZ

PSU - Inwin PL850w

Cables - Tpbmods

 

Loop:

Cpu - EK Velocity Acetal

Gpu - EK RTX Strix

Pump/Res - Xres 140 Revo D5 Glass

Rads - EK SE360/PL240

Fittings - EK 16mm Torque Series

Fans - Inwin Sirius Loop 120mm

 

ILhJRz4.jpg

zDefET7.jpg

wysalYO.jpg

g9QBIVr.jpg

IyC8S32.jpg

S0Kg5W1.jpg

1VCqmKz.jpg

St8HVn2.jpg

ZgREeDR.jpg

lFuUEar.jpg

QWknGJS.jpg

doKRTdz.jpg

ThykfiF.jpg

X0RUInv.jpg

4NBaxr1.jpg

rGWwF8I.jpg

DM53WlP.jpg

QfCETVU.jpg

89eRXJA.jpg

0ezqbMM.jpg

vz4YF59.jpg

2CI5a4b.jpg

PlqHpGj.jpg

rpv0B5y.jpg

 

 

Link to comment
Share on other sites

Nice ! Clean cut and love the black and silver. I am assuming the ''InWin" to the lower section of the case is your own etching ?

  • Thanks 1

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro SE Gen 5 4TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: 2x WD RED 1TB NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

Nice ! Clean cut and love the black and silver. I am assuming the ''InWin" to the lower section of the case is your own etching ?

 

Thank you kindly. And yes indeed it was. I wanted to do a mood that had zero painting done, no vinyl, no acrylic. Basically make a mod that was as hard as possible too do at my desk! So the Logo was all done by dremel with an engraving bit and a stone

Link to comment
Share on other sites

Wow, well I have to say that is a job well done considering the method in which you achieved that.

 

Out if interest how long was this build process ?

 

 

​​​​

  • Thanks 1

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro SE Gen 5 4TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Owned

 Share

CPU: Intel Core i5 8500
RAM: 16GB (2x8GB) Kingston 2666Mhz
SSD/NVME: 256GB Samsung NVMe
NETWORK: HP 561T 10Gbe (Intel X540 T2)
MOTHERBOARD: Proprietry
GPU: Intel UHD Graphics 630
PSU: 90Watt
CASE: HP EliteDesk 800 G4 SFF
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: 2x WD RED 1TB NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

Wow, well I have to say that is a job well done considering the method in which you achieved that.

 

Out if interest how long was this build process ?

 

 

​​​​

 

The exterior shell was shipped out from BC to AB(next province over) to my team mate, he invested quite a bit of time optimizing how much pattern he could cut based on the limits of his shapeko. That whole process from sending to getting it back was a month?

 

Once I got it back, I basically had a total of 12hrs a week to do any actual modding and building, minus holiday festivities. All in all its got about 60 man hours invested.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy