Jump to content

Welcome to ExtremeHW

Welcome to ExtremeHW, register to take part in our community, don't worry this is a simple FREE process that requires minimal information for you to signup.

 

Registered users can: 

  • Start new topics and reply to others.
  • Show off your PC using our Rig Creator feature.
  • Subscribe to topics and forums to get updates.
  • Get your own profile page to customize.
  • Send personal messages to other members.
  • Take advantage of site exclusive features.
  • Upgrade to Premium to unlock additional sites features.
IGNORED

Crosshair IX Hero eps question


neurotix
Go to solution Solved by The Pook,

Recommended Posts

Premium Platinum - Lifetime

Hey guys, my current Crosshair VIII Hero has 1x8 pin eps and 1x4pin eps. Both are connected.

 

I am considering upgrading to the Crosshair IX Hero and getting a 7900x3d when it drops but saw that the board requires 2x8 pin eps connectors and I *might* have another 8 pin cable in my psu box but I'm unsure.

 

So question is, would I be able to run this setup and have it post and work with just 1x 8 pin eps?

 

Thanks in advance for any replies.

 

EDIT: I actually may have two 8 pin that can be split to a four pin and thats whsts hooked up, with a 4 pin extra. My radiator and fans cover the eps connectors up.

 

Look at the right side, there's two flat mounted eps cables that look like they have the same amount of wires and possibly pins.

 

 

20200131_152340(1).jpg

Edited by neurotix

$5500

Owned

 Share

CPU: Ryzen 9 7900X3D 2100MHz fclk
RAM: G.skill TridentZ5 7600MHz 36-45-45-45 1.425v
GPU: MSI RTX 4090 Gaming X Trio 3.135GHz/12.152GHz
MOTHERBOARD: Asus ROG Strix X670E-E Gaming Wifi
SSD/NVME: Crucial T700 1TB Gen 5 M.2
MONITOR: Acer Ultrawide Curved 3440x1440 144Hz HDR400 FreeSync
CASE: anidees Ai Crystal AR3 Midtower
CPU COOLER: EK Nucleus AIO CR360 Dark w/ PTM7950
Full Rig Info

Owned

 Share

CPU: Ryzen 9 5900x PBO 4.95GHz
GPU: MSI RTX 3060 Ventus
RAM: G.skill Flare X DDR4 3733MHz 16-16-16-32-50 1T GDM on
MOTHERBOARD: ASUS ROG Crosshair VIII Hero
CASE: anidees Ai Crystal Cube
PSU: OCZ ModXStream 550w
SSD/NVME: Samsung 850 Evo 256GB
CPU COOLER: Corsair H100i RGB Pro XT
Full Rig Info

Owned

 Share

CPU: i5-7600 4.5GHz
MOTHERBOARD: ASUS ROG Strix Z270H Gaming
RAM: G.skill DDR4-3000 15-16-16
CASE: Silverstone Grandia series GD09
GPU: GT 710
SSD/NVME: Samsung 850 Evo
MONITOR: Asus V239H 1080p 60Hz IPS
CPU COOLER: Thermalright AXP-120-X67
Full Rig Info
Link to comment
Share on other sites

  • Solution

very few consumers board with >1 EPS connector need both. the VIII Hero isn't one of them, it'd work fine with just one 

 

if your PSU is multi-rail and the EPS connectors are on separate rails then maybe it'd help with balancing but beyond that (or sub-ambient CPU OCing >400W) there's no need. 

Edited by The Pook
  • Thanks 1

1337.69

Owned

 Share

CPU: Intel i9 10900K @ 51/47 1.26v
MOTHERBOARD: Asus Z590 Maximus XIII Hero
RAM: G.Skill DDR4-4266 CL17 32GB @ 4300 15-16-16-35 2T 1.55v
GPU: Gigabyte Aorus Master RTX 3080 Ti
SSD/NVME: Team Group MP34 4TB NVMe + WD Blue 4TB SATA SSD
CPU COOLER: Arctic Liquid Freezer II 360 + Noctua iPPC 3000
PSU: Super Flower Leadex Titanium 1000W
CASE: Fractal Design Meshify S2
Full Rig Info

420.42

Owned

 Share

CPU: Intel i7 8700K @ 47/43 1.22v
MOTHERBOARD: Asrock Z390 Taichi
RAM: Corsair LPX DDR4-3000 CL16 64GB @ 3200 16-20-20-38 1T 1.35v
SSD/NVME: SN850 1TB + HP EX950 2TB + SX8200 2TB NVMe
HDD: 4x Seagate Exos X16 14TB
OPERATING SYSTEM: Windows Server 2022 Datacenter
OTHER: LSI Logic 9207-8i
NETWORK: Intel X540 10 GbE
Full Rig Info

$600

Owned

 Share

CPU: Ryzen 7 5825U
MOTHERBOARD: SFX14-42G-R607
RAM: 16GB LPDDR4-4266
SSD/NVME: SK Hynix P31 Gold 2TB M.2 NVME
SSD/NVME 2: Samsung PM991a 512GB M.2 NVME
GPU: NVIDIA RTX 3050 Ti 4GB 35W @ 55W
OPERATING SYSTEM: Windows 10 Enterprise LTSC 2021
MONITOR: 14" 1080p IPS 60hz @ 72hz
Full Rig Info
Link to comment
Share on other sites

Premium Platinum - Lifetime

I think like I said I actually do have 2x 8 pin eps but they can be split and used for a 4 pin. I think.

 

Thanks though, good to know if i don't the system will still work.

 

Now I just gotta pray I can even get my hands on a 7900x3d, I expect them to sell out fast.

Edited by neurotix
  • Thanks 1

$5500

Owned

 Share

CPU: Ryzen 9 7900X3D 2100MHz fclk
RAM: G.skill TridentZ5 7600MHz 36-45-45-45 1.425v
GPU: MSI RTX 4090 Gaming X Trio 3.135GHz/12.152GHz
MOTHERBOARD: Asus ROG Strix X670E-E Gaming Wifi
SSD/NVME: Crucial T700 1TB Gen 5 M.2
MONITOR: Acer Ultrawide Curved 3440x1440 144Hz HDR400 FreeSync
CASE: anidees Ai Crystal AR3 Midtower
CPU COOLER: EK Nucleus AIO CR360 Dark w/ PTM7950
Full Rig Info

Owned

 Share

CPU: Ryzen 9 5900x PBO 4.95GHz
GPU: MSI RTX 3060 Ventus
RAM: G.skill Flare X DDR4 3733MHz 16-16-16-32-50 1T GDM on
MOTHERBOARD: ASUS ROG Crosshair VIII Hero
CASE: anidees Ai Crystal Cube
PSU: OCZ ModXStream 550w
SSD/NVME: Samsung 850 Evo 256GB
CPU COOLER: Corsair H100i RGB Pro XT
Full Rig Info

Owned

 Share

CPU: i5-7600 4.5GHz
MOTHERBOARD: ASUS ROG Strix Z270H Gaming
RAM: G.skill DDR4-3000 15-16-16
CASE: Silverstone Grandia series GD09
GPU: GT 710
SSD/NVME: Samsung 850 Evo
MONITOR: Asus V239H 1080p 60Hz IPS
CPU COOLER: Thermalright AXP-120-X67
Full Rig Info
Link to comment
Share on other sites

I don't remember what board I had think X299 tomahawk, the stupid thing came with a dual 8 pin splitter so you only needed 1 8 pin power.  It's like uhhhh doesn't this defeat the whole purpose of balancing loads across PSU ports?  Didn't make any sense to me.   

  • Thanks 1

Owned

 Share

CPU: 5800X3D
MOTHERBOARD: MSI MPG B550 Gaming Plus
RAM: 2x16 TridentZ 4400
GPU: 3080ti FE
SSD/NVME: 500GB 970 Evo Plus
PSU: Super Flower Leadex SE 1000W Platinum
CASE: InWin 315
WC CPU BLOCK: Heatkiller IV Basic Acryl Clean
Full Rig Info

Owned

 Share

CPU: 7950x
MOTHERBOARD: ASRock B650E Taichi
RAM: G.Skill Trident Z5 RGB 6400 (2x16GB)
SSD/NVME: WD Black SN850X 2TB
PSU: Super Flower Leadex Platinum 1600W
WC CPU BLOCK: Optimus Foundation AM5 Nickel
CASE: 011 XL White
WC RADIATOR: MO-RA3 360 Core
Full Rig Info
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy