neurotix

Border was done in hopes that when they stitch the thing up, there would be a stitched red border along the side of them. I'll add a red border to both right away.

Thanks Flux. I thought you might like this one. The Box Navies, being completely new to me, feel pretty much like a Box White just with a really really stiff spring. I was hoping they clicked louder like my thicc click Jades, but they don't. Either way, it was a fun project to build this one and I've adjusted to typing on it. I think my favorite switches are still Box Whites in my E-Yooso Z-88 though.

Alright, nevermind that. I have changed the gray one and removed the red border, as everyone in the other staff thread said "just do one flat background color", so I'm guessing that's why Avacado didn't like the gray one. I have also made one similar to Flux'. We probably cannot use his since it has the site logo with a gradient, and UltraMega and I found out while doing hats that anything embroidered needs to be flat colors and not a gradient. I hope these are good enough and liked. I have attached the zip with the files. Now, we just gotta see if @UltraMega can find a site that makes these, once he's not busy. 4 inch lanyards.zip

Are you ok with the gray one I made? It's what you asked for. Otherwise I could make one similar to Flux' or we could just use his...

Thank you Flux, this is helpful. I appreciate your advice. I could definitely alter the opacity on the stripes layer and see how it turns out. But I want to wait and hear Avacado's opinion on the gray one as that was what he requested and is the simplest to move forward with. The key tags are actually 1"x4", not 4"x1". And we still need to find a site that can even make these, as neither Printify or Redbubble offer them. UltraMega said he would try and find a site that does them. I will definitely keep in mind less contrasting colors or such bold stripes and try to apply this in the future and keep in mind that stripes can be subtle. And hey off topic: did you see the keyboard I made recently? Check out the Mechanical keyboard club when you get a chance.

So, I have come up with 3 designs for 4 inch lanyards and following people's advice, they have been tweaked. They have been inspired by this: So here they all are. Plain dark gray because it was asked for. This one might be the one we end up using. Red/black stripes. Black/white stripes and checkerboard pattern. Zip with all of them is attached. 4 inch lanyards.zip

Those timings look good. Not the tightest primary timings but oh well. tRRDS, tRRDL, tFAW, and tCWL look a bit aggressive though. Until OP tries it I guess we won't know.

Updated my board today and yes, Asus has implemented a voltage limit of 1.3v SOC voltage. I already had mine set to 1.25v manually for the entire time I have had my setup. System also posts way way faster, memory training happens a lot faster (like 5 seconds instead of 30) Unfortunately, I've run into the issue with my 2nd CCD not boosting past 5.2GHz in Performance power plan or even 1usmus Ryzen Optimized Balanced power plan. A bios update fixed this for me, and since I bench for HWBOT and finally found the fault with my 4090 (replaced the PSU), I went to try benching today and found out it won't boost past 5150MHz on my 2nd ccd. Last time I tried in 3dmark11 it was boosting to 5625MHz. Not sure what I'm doing wrong, nothing has changed in the bios settings yet chip won't boost on power plans other than Balanced (which only boosts the first, slower CCD). They really need to fix this permanently because it's not the first time and a bios update fixed it before, now before I updated today it wasn't boosting high anymore. Updating the bios today did not fix the issue.

Vertex GX SEASONIC.COM Alright, we got a new PSU and made sure not to have a bend in the 12VHPWR cable. Here's some photos. We need to get clamp style cable combs. (These cables are sleeved from the factory) Ran the cable from above like UltraMega suggested. Unfortunately, I went to try benchmarking with it and again, my 2nd CCD is not boosting past 5200MHz in 3dmark11, Vantage, 06 etc. for HWBOT. Updated bios. Reset power plans. Tried 1usmus Ryzen Optimzed Balanced power plan. Last time I tried 3dmark11 it was working fine and the 2nd CCD was boosting to 5625MHz on like 6 threads at once, now it will only go to 5225MHz. They really shouldn't advertise a chip boosting to 5650MHz when it does so when it feels like it and isn't reliable. I guess I will be waiting for a fix. The good news is my rig posts way faster with the last bios update I just did, my monster memory oc still works, and my system should be good to/safe to fold on again 24/7 without catching fire. I hope.

Scorecard isn't showing up right now, it just says "no matching records"...

New keyboard for my build.

It's the opposite for me, I always use Extreme Tweaker menu. Also, not surprised you only saw 5150MHz on 2 cores, mine behaves the same but does not crash on idle. If I play a game, I'll see it boosting to 5150 pretty frequently.