Bastiaan_NL

Next level paint skills! Is that green thing a GPU?

Good Lord, thanks a lot!! My eyes will be forever grateful

Just that easy, no passkey needed to find out I was a cheating ninja..

The 3090 should stay online, most of the units for the past 20 hours reported 11-33 seconds TPF and a few reported ~55 seconds TPF. Not much I can do about it though, depends on luck. Why is Z not here yet? I could show my gratitude with a "like" for those hourly updates

Haha, that would be so cool! (see what I did there? ) I doubt my boss would like it though, after a few coworkers leaving it's getting a bit out of control with how much work there is to do.

If I search that log I only find this: "<passkey v='*****'/>" And for the TC you'll need this one for the 5700xt system: http://bastiaannl.42web.io/The Office-log.txt

I installed roller blinds(?) in my computer room to keep more heat out, with the curtains it was still pretty warm. Looking at the past few days it seems to work a lot better, but the best thing would be a basement

? So you think that was just one card? How would you use HFM to see which passkey a card is folding on? Just by comparing the PPD reported on one piece of hardware vs the PPD on the TC passkey?

That is so messed up.. Nice! They will look good on the M40's

Yay

It is a bit confusing that it takes so long, because I ordered something from the States and it was here in a week and something from Germany was here the next day. I hope you'll get them asap! Once you are done you could sell those cards as 980ti's

86°f is pretty warm! I'm running at around 50% power to reduce the heat output, it was 77°f when I came home after work. Last summer I've seen around 95°f for a few weeks, that was a bit extreme

Good idea, I would love to have "him" at my side

I hope they'll be able to help you, so you'll feel better soon!

That'll be an expensive trip from the Netherlands to Canada just to clean your system

So good to see all those green arrows and active users! EHW marching up the team ranks ?

Same, I would like to get a few on some of the systems! Also, here is the latest system. Don't mind the mess behind it, I need to organize this room a little better lol Still a work in progress but it can be fired up if I need it. Lots of idea's for this one, but I'll spread the work out over the next few months to enjoy building it even more. More about this build over here: "The Office"

I feel this, draining loops is something I hate doing... But receiving new hardware on the other hand really makes up for that! So basically you bought air? Same, though mine stops at 8bar / 120psi. 13gal/2hp, sweet little compressor for every job

Just what I needed to make my day even better, an update on the CFP!! Nice writeup E, must be a pleasure to work with all that cool hardware. Did you feel the weight of that motherboard? Thanks a lot for sponsoring this project Corsair! That's a lot of money, but at least you have the perfect case now. Looks like a good quality case with all the features you need for this project to work. I'm sure they will be needed with 6 M40's in there!

The only thing a MEM OC does is increase the chance of a faulty work unit. So I do the same as @Avacado, only overclock the Core and leave the Memory alone. There will be more power left for the core too, so it might just boost/clock a little higher too! Also @Alex, if you want me to get the 3090 going for you send me a PM with the information mentioned in the OP

Nice, it's up and running! I approve of the fill port on the radiator, easy to service the system

That's not a problem, the passkey is added to 3 cards now to validate it. 5 units left and after that it'll be only the AMD card. Good idea about the names and captains. I would like the Fluffy Pink Ninja's to live on! Also, the team comp might need a sub section in the F@H section

You could give this a try: Drill a hole in a piece of wood the exact size you need for the fill port as a guide for the holesaw. (Use at least 1" thick wood and make sure the hole is straight) Use the masking tape you mentioned to protect both sides of the panel. Get a second piece of wood that fits on the other side of the panel you want to drill. (This will also catch metal filings) Use screw clamps to secure the pieces of wood on each side of the panel. I wouldn't be afraid to drill the hole without removing the panel. You could always use a newspaper and some masking tape to cover most of the insides. Those holesaws tend to move a lot, without a guide the hole might end up bigger than you want it to be.

That's a creepy purchase, and 90 days?? I love the look of those cards!

The 5700xt system is online for TC testing and validating the passkey, power limited at 85% for heat/noise.