Caselabs: CaseLabs is back

[iamjanco]

It will be interesting to see how this plays out:

 

[Avacado]

You beat me to it. This is indeed very good news. 

Edited January 22, 2023 by Avacado

[Dagamus_NM]

I really hope they bring tempered glass panels for our cases. The acrylic is so easy to scratch.

 

It would be nice to update front panel headers to new interfaces.

 

New Caselabs builds inspire so many to want to get into the hobby.

[Barefooter]

Yeah hope this works out!  I have four CaseLabs cases that I've managed to collect over the last few years that still need to be built in!

 

Hoping to get and extended top or two, plus other  accessories.

[iamjanco]

Amen. Btw, welcome to the forum, bud 

[Barefooter]

19 hours ago, iamjanco said:

Amen. Btw, welcome to the forum, bud 

Thank you my friend and good to see you here as well!  I was planning to start a new build log soon, I think I'll be posting it on this site instead of "the old one" 

[Dagamus_NM]

22 hours ago, Barefooter said:

Yeah hope this works out!  I have four CaseLabs cases that I've managed to collect over the last few years that still need to be built in!

 

Hoping to get and extended top or two, plus other  accessories.

How many total CL cases are you up to now?

[Avacado]

23 hours ago, Barefooter said:

Yeah hope this works out!  I have four CaseLabs cases that I've managed to collect over the last few years that still need to be built in!

 

Hoping to get and extended top or two, plus other  accessories.

Having four must be nice. I do regret selling my s8s and TH10. 

[Sir Beregond]

2 hours ago, Avacado said:

Having four must be nice. I do regret selling my s8s and TH10. 

Oh man, when did you sell those?

[Avacado]

9 minutes ago, Sir Beregond said:

Oh man, when did you sell those?

 

Got much more than I paid for both. Chibi sold me the s8s from OCN

Edited February 8, 2023 by Avacado

[Barefooter]

2 hours ago, Dagamus_NM said:

How many total CL cases are you up to now?

Hey Dagamus_NM great to see you here!  I remember you posting on my "Devastator" build log.

 

As for how many cases I have besides the THW10 for the "Devastator", I have an SM8 that I'll probably build something for my wife.  I also have a SM8-A in perfect condition from ebay that I'll be doing a build for one of my friends that will be my next build, and a very nice S8 with a windowed top panel and pedestal that will eventually replace my current secondary rig that I purchased from a member on OCN.

 

I also picked up a S5 off of ebay that has most of the outer panels stripped down to the metal and the prior owner gave up on it, I'll custom powder coat that one whenever I get around to building in it.

 

2 hours ago, Avacado said:

Having four must be nice. I do regret selling my s8s and TH10. 

Hey Avacado... I hear you there.

[Memmento Mori]

lets hope for the best regarding the new start of Caselabs. Just checked ebay and im amazed that there rly is not much to see or to buy 

 

Having an SM8 and just bought 4 years ago some spare part from an Romanian seller for crazy money. But happy i did bcs in europe is the chance almost 0 to find anything…

 

Would be nice to have an XL side pannel with tempered glass…

 

And can someone recomend me an alternative to the case stands? Please let me know if you ise the standsrd ones or replaced them.. if so, replaced by what?

 

BTW - would be nice if someone from the oficial staff would invite Emil (M-oll) over here 

 

 

[Dagamus_NM]

15 hours ago, Memmento Mori said:

lets hope for the best regarding the new start of Caselabs. Just checked ebay and im amazed that there rly is not much to see or to buy 

 

Having an SM8 and just bought 4 years ago some spare part from an Romanian seller for crazy money. But happy i did bcs in europe is the chance almost 0 to find anything…

 

Would be nice to have an XL side pannel with tempered glass…

 

And can someone recomend me an alternative to the case stands? Please let me know if you ise the standsrd ones or replaced them.. if so, replaced by what?

 

BTW - would be nice if someone from the oficial staff would invite Emil (M-oll) over here 

 

 

I bought some custom feet for my s8 cases from MNPC a few years back. For an s8 with a pedestal these are perfect.

 

Grooved PC Case Feet, Large ATX EATX

WWW.MNPCTECH.COM

---

Mnpctech's "Grooved" Desktop Custom PC Case feet are CNC Machined from 6061 Aluminum. Great for Computer cases that are...

I have one set of these and a set of smooth ones that they don't seem to have listed anymore.

 

Anyhow, these case feet are not cheap. But at the same time they are not cheap.

21 hours ago, Barefooter said:

Hey Dagamus_NM great to see you here!  I remember you posting on my "Devastator" build log.

 

Your builds are sweet. Can't wait to see what you do with these cases.

Edited February 9, 2023 by Dagamus_NM

[Avacado]

5 minutes ago, Dagamus_NM said:

I bought some custom feet for my s8 cases from MNPC a few years back. For an s8 with a pedestal these are perfect.

 

Grooved PC Case Feet, Large ATX EATX

WWW.MNPCTECH.COM

---

Mnpctech's "Grooved" Desktop Custom PC Case feet are CNC Machined from 6061 Aluminum. Great for Computer cases that are...

I have one set of these and a set of smooth ones that they don't seem to have listed anymore.

 

Anyhow, these case feet are not cheap. But at the same time they are not cheap.

I had those too. Also the Munkey Mods flex bay adapters. 

[Dagamus_NM]

Looks like they make turntable feet too. Not cheap, but if they are like my CL feet they are going to be nice.

 

Technics SL-1200, SL-1200G, SL-1200GR, SL-1210, SL-1210GAE, SL-1210GR Turntable Isolation Feet (Four)

WWW.MNPCTECH.COM

---

These custom made anti-vibration isolation feet for the Technics SL1200, SL1210, SL1200 G, SL-1200 GR, SL1200 GAE, and SL2010 GR...

 

[Memmento Mori]

On 09/02/2023 at 21:22, Dagamus_NM said:

I bought some custom feet for my s8 cases from MNPC a few years back. For an s8 with a pedestal these are perfect.

 

Grooved PC Case Feet, Large ATX EATX

WWW.MNPCTECH.COM

---

Mnpctech's "Grooved" Desktop Custom PC Case feet are CNC Machined from 6061 Aluminum. Great for Computer cases that are...

I have one set of these and a set of smooth ones that they don't seem to have listed anymore.

 

Anyhow, these case feet are not cheap. But at the same time they are not cheap.

 

Your builds are sweet. Can't wait to see what you do with these cases.

 

On 09/02/2023 at 23:05, Dagamus_NM said:

Looks like they make turntable feet too. Not cheap, but if they are like my CL feet they are going to be nice.

 

Technics SL-1200, SL-1200G, SL-1200GR, SL-1210, SL-1210GAE, SL-1210GR Turntable Isolation Feet (Four)

WWW.MNPCTECH.COM

---

These custom made anti-vibration isolation feet for the Technics SL1200, SL1210, SL1200 G, SL-1200 GR, SL1200 GAE, and SL2010 GR...

 

 

yes this is the basically the style im trying to find but the prices are incredible.. Mainly if it is from the audiophile corner  

 

Will try to find a handy man with the machine to make it from solid Aluminum or copper billets - making them a bit customized.... Lets see. If im successful ill report back the outcome  

[Memmento Mori]

first pics of the custom Aluminum stands for my SM8.. Copper would be insane expensive so for this Aluminum.. but full solid  

 

Edited March 12, 2023 by Memmento Mori

[Avacado]

5 hours ago, Memmento Mori said:

first pics of the custom Aluminum stands for my SM8.. Copper would be insane expensive so for this i Aluminum.. but full solid  

 

They look like MNPCtech feet.

[ENTERPRISE]

10 hours ago, Memmento Mori said:

first pics of the custom Aluminum stands for my SM8.. Copper would be insane expensive so for this i Aluminum.. but full solid  

 

They look class! Well done.

[Memmento Mori]

8 hours ago, Avacado said:

They look like MNPCtech feet.

 

basically very similar design, but instead almost 80 USD i paid 40 EUR - they are custom hand made (you can see it on the rills as they are not the same     - but its mine so i don't care :P) and the diameter is 50mm and 40 mm height   which should be twice the height (if my calculations are right)compared to the MNPCTECH.... will post some pics after i get it installed ... Maybe i will try to get on it a brushed look but lets see.. 

[Memmento Mori]

3 hours ago, ENTERPRISE said:

They look class! Well done.

 

Thank you very much  

[Memmento Mori]

Hi there, got an update on the stands, but dont want to hijack this thread anymore - Custom case stands for Caselabs SM8

 

Sorry for being off-topic before

[Avacado]

4 hours ago, Memmento Mori said:

Hi there, got an update on the stands, but dont want to hijack this thread anymore - Custom case stands for Caselabs SM8

 

Sorry for being off-topic before

Not really hijacking if it's related to CL. 

[Avacado]

There is a TH10A on ebay right now for $599 with free shipping. Ugh, so tempting!

 

https://www.ebay.com/itm/155394635395?hash=item242e3df683:g:hcEAAOSwh4dj3-ou&amdata=enc%3AAQAHAAAA4FnjeWUiHpq3h7u5Zp3s%2F4uPDljiuL3vBsDizbhMHACybjvp%2F9UeP7DqNxOHmg7g5nm6qptJ52wsP%2B0ba8bJTGnTm43ggWQ7KO%2Fkz%2BfubhO14ZRXFFhDPlQpyq73YiMt0nrkKe2n%2F4D%2BMwkIyy9RyRrms8LB6HSHZTh3YiiqmW9vIAtvlzYICax0xvXZvOcd01Zqdi%2BY382yuX1srVROgc1pcPjM5XCpPfUGM7NfcIzMLZKx70dxtt81XzACcSVbgN4rAW%2Fj4Uxtlu%2Fds%2FalbxVILr%2B8BAfRR2zYiTPTkFUq|tkp%3ABk9SR6yQg_XlYQ

[Barefooter]

1 hour ago, Avacado said:

There is a TH10A on ebay right now for $599 with free shipping. Ugh, so tempting!

 

https://www.ebay.com/itm/155394635395?hash=item242e3df683:g:hcEAAOSwh4dj3-ou&amdata=enc%3AAQAHAAAA4FnjeWUiHpq3h7u5Zp3s%2F4uPDljiuL3vBsDizbhMHACybjvp%2F9UeP7DqNxOHmg7g5nm6qptJ52wsP%2B0ba8bJTGnTm43ggWQ7KO%2Fkz%2BfubhO14ZRXFFhDPlQpyq73YiMt0nrkKe2n%2F4D%2BMwkIyy9RyRrms8LB6HSHZTh3YiiqmW9vIAtvlzYICax0xvXZvOcd01Zqdi%2BY382yuX1srVROgc1pcPjM5XCpPfUGM7NfcIzMLZKx70dxtt81XzACcSVbgN4rAW%2Fj4Uxtlu%2Fds%2FalbxVILr%2B8BAfRR2zYiTPTkFUq|tkp%3ABk9SR6yQg_XlYQ

I saw that and was temped to pull the trigger myself!

 

It's actually a great deal for someone looking for a Case Labs case.