Jump to content

Welcome to ExtremeHW

Welcome to ExtremeHW, register to take part in our community, don't worry this is a simple FREE process that requires minimal information for you to signup.

 

Registered users can: 

  • Start new topics and reply to others.
  • Show off your PC using our Rig Creator feature.
  • Subscribe to topics and forums to get updates.
  • Get your own profile page to customize.
  • Send personal messages to other members.
  • Take advantage of site exclusive features.
  • Upgrade to Premium to unlock additional sites features.
IGNORED

Fix for fans @ 100% pre-POST?


The Pook

Recommended Posts

I've got 11 fans in my system and 6 are iPPC 3000s, and the BIOS-set fan profile doesn't kick in until after POST. My PC basically levitates until after the system POSTs, then the BIOS set profile kicks in until the OS loads my Argus curve. 

 

It seems to be a board specific problem, my Taichi follows BIOS-set fan speed/profiles before POST and IIRC my Aorus Pro did too. 

 

Short of swapping fans or boards, is there a fix? If I had an open 3.5/5.25 bay I'm sure I could get some fan controller with a delay function but I can't seem to find anything on one I can stick inside the case. 

 

sos, help please 

1337.69

Owned

 Share

CPU: Intel i9 10900K @ 51/47 1.26v
MOTHERBOARD: Asus Z590 Maximus XIII Hero
RAM: G.Skill DDR4-4266 CL17 32GB @ 4300 15-16-16-35 2T 1.55v
GPU: Gigabyte Aorus Master RTX 3080 Ti
SSD/NVME: Team Group MP34 4TB NVMe + WD Blue 4TB SATA SSD
CPU COOLER: Arctic Liquid Freezer II 360 + Noctua iPPC 3000
PSU: Super Flower Leadex Titanium 1000W
CASE: Fractal Design Meshify S2
Full Rig Info

420.42

Owned

 Share

CPU: Intel i7 8700K @ 47/43 1.22v
MOTHERBOARD: Asrock Z390 Taichi
RAM: Corsair LPX DDR4-3000 CL16 64GB @ 3200 16-20-20-38 1T 1.35v
SSD/NVME: SN850 1TB + HP EX950 2TB + SX8200 2TB NVMe
HDD: 4x Seagate Exos X16 14TB
OPERATING SYSTEM: Windows Server 2022 Datacenter
OTHER: LSI Logic 9207-8i
NETWORK: Intel X540 10 GbE
Full Rig Info

$600

Owned

 Share

CPU: Ryzen 7 5825U
MOTHERBOARD: SFX14-42G-R607
RAM: 16GB LPDDR4-4266
SSD/NVME: SK Hynix P31 Gold 2TB M.2 NVME
SSD/NVME 2: Samsung PM991a 512GB M.2 NVME
GPU: NVIDIA RTX 3050 Ti 4GB 35W @ 55W
OPERATING SYSTEM: Windows 10 Enterprise LTSC 2021
MONITOR: 14" 1080p IPS 60hz @ 72hz
Full Rig Info
Link to comment
Share on other sites

Aquacomputer Quadro or Octo are fan controllers you could mount anywhere in the case. 

  • Thanks 1

Owned

 Share

CPU: 5900X + Optimus block
MOTHERBOARD: MSI X570 Ace
GPU: EVGA RTX 3090 FTW3 Ultra + Optimus block
RAM: 32GB Oloy Blade 3600CL14
SSD/NVME: 1TB SN750 Black
SSD/NVME 2: 1TB SN750 Black
SSD/NVME 3: 2TB Samsung 970 Evo Plus
CASE: LD PC-V7
Full Rig Info

Owned

 Share

CPU: Delidded i9-10850k
MOTHERBOARD: z490i Aorus Ultra
RAM: T-Force Xtreem 3600cl14
GPU: MSI RTX 2080
CASE: InWin D-Frame Mini
WC RADIATOR: MO-RA3 with 4x180mm Silverstone fans
FAN CONTROLLER: Aquaero
Full Rig Info

Owned

 Share

CPU: 7700X
MOTHERBOARD: Strix B650E-I
RAM: G.Skill Flare X5 6000
GPU: EVGA 1080ti
CASE: Sliger SM580
WC RESEVOIR: Phanteks R160C
WC RADIATOR: XSPC TX240 Ultrathin
FANS: Phanteks T30
Full Rig Info
Link to comment
Share on other sites

25 minutes ago, Fluxmaven said:

Aquacomputer Quadro or Octo are fan controllers you could mount anywhere in the case. 

 

sweet, thanks

 

now I have to decide if $80 is worth fixing a minor annoyance  🙃

 

 

1337.69

Owned

 Share

CPU: Intel i9 10900K @ 51/47 1.26v
MOTHERBOARD: Asus Z590 Maximus XIII Hero
RAM: G.Skill DDR4-4266 CL17 32GB @ 4300 15-16-16-35 2T 1.55v
GPU: Gigabyte Aorus Master RTX 3080 Ti
SSD/NVME: Team Group MP34 4TB NVMe + WD Blue 4TB SATA SSD
CPU COOLER: Arctic Liquid Freezer II 360 + Noctua iPPC 3000
PSU: Super Flower Leadex Titanium 1000W
CASE: Fractal Design Meshify S2
Full Rig Info

420.42

Owned

 Share

CPU: Intel i7 8700K @ 47/43 1.22v
MOTHERBOARD: Asrock Z390 Taichi
RAM: Corsair LPX DDR4-3000 CL16 64GB @ 3200 16-20-20-38 1T 1.35v
SSD/NVME: SN850 1TB + HP EX950 2TB + SX8200 2TB NVMe
HDD: 4x Seagate Exos X16 14TB
OPERATING SYSTEM: Windows Server 2022 Datacenter
OTHER: LSI Logic 9207-8i
NETWORK: Intel X540 10 GbE
Full Rig Info

$600

Owned

 Share

CPU: Ryzen 7 5825U
MOTHERBOARD: SFX14-42G-R607
RAM: 16GB LPDDR4-4266
SSD/NVME: SK Hynix P31 Gold 2TB M.2 NVME
SSD/NVME 2: Samsung PM991a 512GB M.2 NVME
GPU: NVIDIA RTX 3050 Ti 4GB 35W @ 55W
OPERATING SYSTEM: Windows 10 Enterprise LTSC 2021
MONITOR: 14" 1080p IPS 60hz @ 72hz
Full Rig Info
Link to comment
Share on other sites

I can justify them because all of my builds have custom loops. Flow sensor input and the ability to base fan speed off of liquid temp is nice. 

  • Thanks 2

Owned

 Share

CPU: 5900X + Optimus block
MOTHERBOARD: MSI X570 Ace
GPU: EVGA RTX 3090 FTW3 Ultra + Optimus block
RAM: 32GB Oloy Blade 3600CL14
SSD/NVME: 1TB SN750 Black
SSD/NVME 2: 1TB SN750 Black
SSD/NVME 3: 2TB Samsung 970 Evo Plus
CASE: LD PC-V7
Full Rig Info

Owned

 Share

CPU: Delidded i9-10850k
MOTHERBOARD: z490i Aorus Ultra
RAM: T-Force Xtreem 3600cl14
GPU: MSI RTX 2080
CASE: InWin D-Frame Mini
WC RADIATOR: MO-RA3 with 4x180mm Silverstone fans
FAN CONTROLLER: Aquaero
Full Rig Info

Owned

 Share

CPU: 7700X
MOTHERBOARD: Strix B650E-I
RAM: G.Skill Flare X5 6000
GPU: EVGA 1080ti
CASE: Sliger SM580
WC RESEVOIR: Phanteks R160C
WC RADIATOR: XSPC TX240 Ultrathin
FANS: Phanteks T30
Full Rig Info
Link to comment
Share on other sites

9 hours ago, The Pook said:

 

sweet, thanks

 

now I have to decide if $80 is worth fixing a minor annoyance  🙃

 

 

If you are like me, I justify spending money to solve minor annoyances all the time lol. 

 

I actually have the same fans as you, but they run off my case fan controller and not too bad...but they are certainly still audible. Great fans though no doubt.

  • Thanks 1
  • Respect 1

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro Gen 5 2TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

£200

Owned

 Share

CPU: AMD RX-427BB
RAM: 16GB Corsair 1600MHZ DDR3L
SSD/NVME: WD Blue 250GB M.2 SATA SSD
NETWORK: Intel I350 -T4
CASE: HP Thin Client T730
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: Samsung 1TB 980 NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

Quadro is close to half that. Mod my mods is currently out of stock, but lists it at $48 (Cheapest of the e-tailers). You could sign up for a stock alert. You can easily run 3 fans per header. 

 

WWW.TITANRIG.COM

Programmable four-channel fan controllerFour fan outputs with up to 25 watts power per channel and speed monitoringAll fan outputs with 4-pin plug, PWM-signal adjustable, and can be switched off...

 

Edited by Avacado
  • Thanks 2
Link to comment
Share on other sites

ironically this same100% happens even on corsair commander pros

  • Thanks 1

Owned

 Share

CPU: AMD R9 5950X
GPU: AMD RX 5700XT Reference
MOTHERBOARD: Asus ROG Strix B550-I Gaming
RAM: KIngston Fury X Black RGB 64GB 3600MHZ
SSD/NVME: Sabrent Rocket NVMe 500GB (Windows)
SSD/NVME 2: Crucial MX 500 2TB (Games)
SSD/NVME 3: Cruicial MX 300 1TB (File Storage)
SSD/NVME 4: WD Blue 1TB SATA M.2 (Backups/Downloads)
Full Rig Info

Owned

 Share

CPU: Xeon 5345 @ 2.3GHZ
CPU 2: Xeon 5345 @ 2.3GHZ
MOTHERBOARD: Intel S5000PSL E-ATX
RAM: 32GB Hynix ECC DDR2 667Mhz
CPU COOLER: 2x Dynatron 2U Heatsinks
SSD/NVME: Samsung 840 EVO 120GB
HDD: Seagate Firecuda Compute 2TB
OPERATING SYSTEM: Winodws Server 2019 Standard
Full Rig Info
Link to comment
Share on other sites

Need a fan controller that saves the settings in the firmware like the Aquacomputer gear does. If using MB fan headers this will always happen as there is no fan control till it posts, hence the need to go off board. Outside of using a startup boost my fans never go past 600rpm's. 

Just remember each channels settings is saved into the firmware so if you ever use that Aquero, Octo or Quadro again it'll have the old settings saved, so don't be surprised while testing fans out one day years from now why say 1 channel isn't working. 

  • Thanks 1
Link to comment
Share on other sites

11 minutes ago, Outsider said:

Need a fan controller that saves the settings in the firmware

This is the thing that keeps drawing me towards the Aquacomputer gear.  Lots of customization and control without resource overhead inside of the operating system.  I confess, I only recently "got it" regarding Aquacomputer's offerings.

TDM

Owned

 Share

CPU: 5950x
MOTHERBOARD: Dark Hero
GPU: Aorus 6900XT Extreme WF
RAM: G. Skill Ripjaws V 64GB 3600 14-14-14-34
WC CPU BLOCK: Watercool Heatkiller IV
WC PUMP: XTOP Revo / FLT 120 + 3 D5's
SSD/NVME: Samsung 980 Pro
CASE: Gutted Enthoo Pro 2
Full Rig Info
Link to comment
Share on other sites

11 minutes ago, ArchStanton said:

This is the thing that keeps drawing me towards the Aquacomputer gear.  Lots of customization and control without resource overhead inside of the operating system.  I confess, I only recently "got it" regarding Aquacomputer's offerings.

You'll never go back once you go. 

Link to comment
Share on other sites

You guys run fans below 100%? 😂

  • Respect 1

Owned

 Share

CPU: Intel Core i9 13900KF
MOTHERBOARD: ASUS ROG MAXIMUS Z690 HERO
RAM: G.SKILL Trident Z5 6400CL30-38-38-28
PSU: Corsair RM850x
GPU: EVGA GeForce RTX 3070Ti FTW3
Full Rig Info
Link to comment
Share on other sites

35 minutes ago, Outsider said:

If using MB fan headers this will always happen as there is no fan control till it posts, hence the need to go off board.

 

dunno about "always", I had this same fan setup on 3 motherboards and this is the only one trying to fly around the room. 

 

  

2 minutes ago, Bastiaan_NL said:

You guys run fans below 100%? 😂

 

modern-family-spray.gif

Edited by The Pook
  • Respect 1

1337.69

Owned

 Share

CPU: Intel i9 10900K @ 51/47 1.26v
MOTHERBOARD: Asus Z590 Maximus XIII Hero
RAM: G.Skill DDR4-4266 CL17 32GB @ 4300 15-16-16-35 2T 1.55v
GPU: Gigabyte Aorus Master RTX 3080 Ti
SSD/NVME: Team Group MP34 4TB NVMe + WD Blue 4TB SATA SSD
CPU COOLER: Arctic Liquid Freezer II 360 + Noctua iPPC 3000
PSU: Super Flower Leadex Titanium 1000W
CASE: Fractal Design Meshify S2
Full Rig Info

420.42

Owned

 Share

CPU: Intel i7 8700K @ 47/43 1.22v
MOTHERBOARD: Asrock Z390 Taichi
RAM: Corsair LPX DDR4-3000 CL16 64GB @ 3200 16-20-20-38 1T 1.35v
SSD/NVME: SN850 1TB + HP EX950 2TB + SX8200 2TB NVMe
HDD: 4x Seagate Exos X16 14TB
OPERATING SYSTEM: Windows Server 2022 Datacenter
OTHER: LSI Logic 9207-8i
NETWORK: Intel X540 10 GbE
Full Rig Info

$600

Owned

 Share

CPU: Ryzen 7 5825U
MOTHERBOARD: SFX14-42G-R607
RAM: 16GB LPDDR4-4266
SSD/NVME: SK Hynix P31 Gold 2TB M.2 NVME
SSD/NVME 2: Samsung PM991a 512GB M.2 NVME
GPU: NVIDIA RTX 3050 Ti 4GB 35W @ 55W
OPERATING SYSTEM: Windows 10 Enterprise LTSC 2021
MONITOR: 14" 1080p IPS 60hz @ 72hz
Full Rig Info
Link to comment
Share on other sites

4 minutes ago, Bastiaan_NL said:

You guys run fans below 100%? 😂

I didn't want to make fun of our friends for being wrong. On a side note, please make your avatar the cry laugh emoji. Thank you, that is all. 

Edited by Avacado
  • Respect 1
Link to comment
Share on other sites

1 minute ago, Avacado said:

I didn't want to make fun of our friends for being wrong. 

 

one for you too 

 

modern-family-spray.gif

  • Respect 1

1337.69

Owned

 Share

CPU: Intel i9 10900K @ 51/47 1.26v
MOTHERBOARD: Asus Z590 Maximus XIII Hero
RAM: G.Skill DDR4-4266 CL17 32GB @ 4300 15-16-16-35 2T 1.55v
GPU: Gigabyte Aorus Master RTX 3080 Ti
SSD/NVME: Team Group MP34 4TB NVMe + WD Blue 4TB SATA SSD
CPU COOLER: Arctic Liquid Freezer II 360 + Noctua iPPC 3000
PSU: Super Flower Leadex Titanium 1000W
CASE: Fractal Design Meshify S2
Full Rig Info

420.42

Owned

 Share

CPU: Intel i7 8700K @ 47/43 1.22v
MOTHERBOARD: Asrock Z390 Taichi
RAM: Corsair LPX DDR4-3000 CL16 64GB @ 3200 16-20-20-38 1T 1.35v
SSD/NVME: SN850 1TB + HP EX950 2TB + SX8200 2TB NVMe
HDD: 4x Seagate Exos X16 14TB
OPERATING SYSTEM: Windows Server 2022 Datacenter
OTHER: LSI Logic 9207-8i
NETWORK: Intel X540 10 GbE
Full Rig Info

$600

Owned

 Share

CPU: Ryzen 7 5825U
MOTHERBOARD: SFX14-42G-R607
RAM: 16GB LPDDR4-4266
SSD/NVME: SK Hynix P31 Gold 2TB M.2 NVME
SSD/NVME 2: Samsung PM991a 512GB M.2 NVME
GPU: NVIDIA RTX 3050 Ti 4GB 35W @ 55W
OPERATING SYSTEM: Windows 10 Enterprise LTSC 2021
MONITOR: 14" 1080p IPS 60hz @ 72hz
Full Rig Info
Link to comment
Share on other sites

^ you only run them at 100%? Gotta overclock those bad boys 😆

 

I agree that once you go Aquacomputer, you can't go back. You could completely uninstall Aquasuite after you configure the controller if you wanted to. Once the controller is flashed, it will run autonomously indefinitely. 

 

It's awesome for non PC projects or external radiators where you just add power and it does it's thing. 

  • Thanks 1

Owned

 Share

CPU: 5900X + Optimus block
MOTHERBOARD: MSI X570 Ace
GPU: EVGA RTX 3090 FTW3 Ultra + Optimus block
RAM: 32GB Oloy Blade 3600CL14
SSD/NVME: 1TB SN750 Black
SSD/NVME 2: 1TB SN750 Black
SSD/NVME 3: 2TB Samsung 970 Evo Plus
CASE: LD PC-V7
Full Rig Info

Owned

 Share

CPU: Delidded i9-10850k
MOTHERBOARD: z490i Aorus Ultra
RAM: T-Force Xtreem 3600cl14
GPU: MSI RTX 2080
CASE: InWin D-Frame Mini
WC RADIATOR: MO-RA3 with 4x180mm Silverstone fans
FAN CONTROLLER: Aquaero
Full Rig Info

Owned

 Share

CPU: 7700X
MOTHERBOARD: Strix B650E-I
RAM: G.Skill Flare X5 6000
GPU: EVGA 1080ti
CASE: Sliger SM580
WC RESEVOIR: Phanteks R160C
WC RADIATOR: XSPC TX240 Ultrathin
FANS: Phanteks T30
Full Rig Info
Link to comment
Share on other sites

20 minutes ago, Bastiaan_NL said:

You guys run fans below 100%? 😂

Yes, for some reason my wife refuses to wear earplugs 24/7 🤷‍♂️🤣.  Sheesh, it's not like I asked for A-t-M and to install a 2.5kW chiller under the house...

  • Thanks 1

TDM

Owned

 Share

CPU: 5950x
MOTHERBOARD: Dark Hero
GPU: Aorus 6900XT Extreme WF
RAM: G. Skill Ripjaws V 64GB 3600 14-14-14-34
WC CPU BLOCK: Watercool Heatkiller IV
WC PUMP: XTOP Revo / FLT 120 + 3 D5's
SSD/NVME: Samsung 980 Pro
CASE: Gutted Enthoo Pro 2
Full Rig Info
Link to comment
Share on other sites

19 minutes ago, Outsider said:

 

When you have 63 of them you do 🤫

you dont understand, bastian lives in a wind tunnel most of his life.

  • Respect 1

Owned

 Share

CPU: AMD R9 5950X
GPU: AMD RX 5700XT Reference
MOTHERBOARD: Asus ROG Strix B550-I Gaming
RAM: KIngston Fury X Black RGB 64GB 3600MHZ
SSD/NVME: Sabrent Rocket NVMe 500GB (Windows)
SSD/NVME 2: Crucial MX 500 2TB (Games)
SSD/NVME 3: Cruicial MX 300 1TB (File Storage)
SSD/NVME 4: WD Blue 1TB SATA M.2 (Backups/Downloads)
Full Rig Info

Owned

 Share

CPU: Xeon 5345 @ 2.3GHZ
CPU 2: Xeon 5345 @ 2.3GHZ
MOTHERBOARD: Intel S5000PSL E-ATX
RAM: 32GB Hynix ECC DDR2 667Mhz
CPU COOLER: 2x Dynatron 2U Heatsinks
SSD/NVME: Samsung 840 EVO 120GB
HDD: Seagate Firecuda Compute 2TB
OPERATING SYSTEM: Winodws Server 2019 Standard
Full Rig Info
Link to comment
Share on other sites

LOL! 🤣

 

Yeah I don't run 100% all the time.

 

Fight Reaction GIF

 

I'm just using mobo headers right now, but a Quadro is on my list.

Edited by Sir Beregond

Showcase

 Share

CPU: AMD Ryzen 9 5900X
GPU: Nvidia RTX 3080 Ti Founders Edition
RAM: G.Skill Trident Z Neo 32GB DDR4-3600 (@ 3733 14-8-14-14-21-35 1T GDM)
MOTHERBOARD: ASUS Crosshair VIII Dark Hero
SSD/NVME: x2 Samsung 970 Evo Plus 2TB
SSD/NVME 2: Crucial MX500 1TB
PSU: Corsair RM1000x
MONITOR: LG 48" C1
Full Rig Info

Owned

 Share

CPU: Intel Core i7-4790k
GPU: ASUS GTX 980 Strix
RAM: Corsair 32GB DDR3-2400
MOTHERBOARD: ASUS Z97 Deluxe
SSD/NVME: Crucial M550 512GB
HDD: 2x WD Black 3TB
PSU: Corsair AX750
CASE: Lian Li O11 Dynamic
Full Rig Info
Link to comment
Share on other sites

1 hour ago, Outsider said:

 

Isn't that what friends are for? 

making fun of, insulting, and drinking beer when your wife is angry at you. thats what friends are for

  • Thanks 1
  • Respect 1

Owned

 Share

CPU: AMD R9 5950X
GPU: AMD RX 5700XT Reference
MOTHERBOARD: Asus ROG Strix B550-I Gaming
RAM: KIngston Fury X Black RGB 64GB 3600MHZ
SSD/NVME: Sabrent Rocket NVMe 500GB (Windows)
SSD/NVME 2: Crucial MX 500 2TB (Games)
SSD/NVME 3: Cruicial MX 300 1TB (File Storage)
SSD/NVME 4: WD Blue 1TB SATA M.2 (Backups/Downloads)
Full Rig Info

Owned

 Share

CPU: Xeon 5345 @ 2.3GHZ
CPU 2: Xeon 5345 @ 2.3GHZ
MOTHERBOARD: Intel S5000PSL E-ATX
RAM: 32GB Hynix ECC DDR2 667Mhz
CPU COOLER: 2x Dynatron 2U Heatsinks
SSD/NVME: Samsung 840 EVO 120GB
HDD: Seagate Firecuda Compute 2TB
OPERATING SYSTEM: Winodws Server 2019 Standard
Full Rig Info
Link to comment
Share on other sites

Aquacomputer gear is amazing. Love all of it to be honest. Hopefully this weekend ill be fitting the Aquacomputer Highflow Next and the Octo to my PC. This thread made me finally decide to spring for the Octo.

  • Respect 1

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro Gen 5 2TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

£200

Owned

 Share

CPU: AMD RX-427BB
RAM: 16GB Corsair 1600MHZ DDR3L
SSD/NVME: WD Blue 250GB M.2 SATA SSD
NETWORK: Intel I350 -T4
CASE: HP Thin Client T730
Full Rig Info

£3000

Owned

 Share

CPU: 2 x Xeon|E5-2696-V4 (44C/88T)
RAM: 128GB|16 x 8GB - DDR4 2400MHz (2Rx8)
MOTHERBOARD: HP Z840|Intel C612 Chipset
GPU: Nvidia Quadro P2200
HDD: 4x 16TB Toshiba MG08ACA16TE Enterprise
SSD/NVME: Intel 512GB 670p NVMe (Main OS)
SSD/NVME 2: Samsung 1TB 980 NVMe (VM's)
SSD/NVME 3: 2x Seagate FireCuda 1TB SSD's (Apps)
Full Rig Info
Link to comment
Share on other sites

4 minutes ago, ENTERPRISE said:

Aquacomputer gear is amazing. Love all of it to be honest. Hopefully this weekend ill be fitting the Aquacomputer Highflow Next and the Octo to my PC. This thread made me finally decide to spring for the Octo.

You won't regret it, just waiting so long to pull the trigger. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy