Jump to content

Welcome to ExtremeHW

Welcome to ExtremeHW, register to take part in our community, don't worry this is a simple FREE process that requires minimal information for you to signup.

 

Registered users can: 

  • Start new topics and reply to others.
  • Show off your PC using our Rig Creator feature.
  • Subscribe to topics and forums to get updates.
  • Get your own profile page to customize.
  • Send personal messages to other members.
  • Take advantage of site exclusive features.
  • Upgrade to Premium to unlock additional sites features.
IGNORED

Extreme cooling journey


Recommended Posts

Premium Platinum - Lifetime

 

For a while I've been the owner of a cascade phasechange unit. I have used it a couple of times for testing, and recently did some benchmarks with the cooler.
I'm trying to figure it all out, and given the lack of time recently there isn't a lot of progress but I'm trying to record some of it so I can share that here or elsewhere. 
There are more ideas brewing, but I'm not rushing any of that. More to come, hopefully 😄 

 

 

image.thumb.jpeg.e91126bad94d996a66e9b25784f19961.jpeg

Edited by Bastiaan_NL
  • Thanks 1
  • Respect 9
Link to comment
Share on other sites

Premium Platinum - Lifetime

An overview of the setup, 12600K, Z790 Apex and G.Skill A-die:

 

And a webcam shot of the setup, notice the temperature drop during a run and the temperature climbing after the run:

 

Edited by Bastiaan_NL
  • Respect 7
Link to comment
Share on other sites

  On 14/06/2023 at 19:53, Bastiaan_NL said:

An overview of the setup, 12600K, Z790 Apex and G.Skill A-die:

 

And a webcam shot of the setup, notice the temperature drop during a run and the temperature climbing after the run:

 

Expand  

 

...can't quite tell the fan air flow direction (looks like blowing inwards towards the socket though)... fyi, some XOCers like the two helper fans turned around so that they help evacuate potentially moist air away from the socket and surrounding electrical bits...in my personal experience though, it doesn't make a ton of difference

Owned

 Share

CPU: CPU: ><.......7950X3D - Aorus X670E Master - 48GB DDR5 7200 (8000) TridentZ SK Hynix - Giga-G-OC/Galax RTX 4090 670W - LG 48 OLED - 4TB NVMEs >< .......5950X - Asus CH 8 Dark Hero - 32GB CL13 DDR4 4000 - AMD R 6900XT 500W - Philips BDM40 4K VA - 2TB NVME & 3TB SSDs >> - <<.......4.4 TR 2950X - MSI X399 Creation - 32 GB CL 14 3866 - Asus RTX 3090 Strix OC/KPin 520W and 2x RTX 2080 Ti Gigabyte XTR WF WB 380W - LG 55 IPS HDR - 1TB NVME & 4TB SSDs
Full Rig Info
Link to comment
Share on other sites

Premium Platinum - Lifetime
  On 18/06/2023 at 03:55, J7SC_Orion said:

 

...can't quite tell the fan air flow direction (looks like blowing inwards towards the socket though)... fyi, some XOCers like the two helper fans turned around so that they help evacuate potentially moist air away from the socket and surrounding electrical bits...in my personal experience though, it doesn't make a ton of difference

Expand  

I expected you to comment on that 😁

The fans are blowing inward.

So I see little to no ice buildup around the socket after a 2 hour session. The board is covered with liquid tape between the inductors and the same area on the back. The back has one layer of armaflex clamped between the board and the LN2 pot backplate and a second layer underneath and there is an armaflex ring around the evap base. I stuff as much shop towel between the threads of the mount and the evap base/armaflex to catch whatever moisture escapes, but after breaking down they were all dry. It feels very efficient, for what I can tell with limited experience. The fans are there to cool the VRM, but if I notice any moisture I will add extra fans in an outward direction. As for LN2, I bet that will make a bit more difference with buildup.

 

Edited by Bastiaan_NL
  • Thanks 1
  • Respect 1
Link to comment
Share on other sites

  • 2 months later...
Premium Platinum - Lifetime

This weekend I've been playing with dry ice on an MSI RX5700XT.
It was my first time with dice and running a GPU sub ambient (the previous attempts with the cascade didn't go so well). It was fun and I learned a few things at the same time, for instance: don't put too much dice and acetone in the pot or it will boil over the edge and make the GPU stop working 😂
I managed to take back my gold in TimeSpy (for now) and get a second place in WildLife Extreme for the team competition.
Near the end of todays run the pot started leaking, acetone is dirty stuff and makes its way through threads sealed with Loctite. The shop towel protecting the motherboard was getting wet from Acetone, not ideal.
Anyways, here are a few pictures, a YouTube video and a few links to submissions:

 

HWBOT.ORG

The Radeon RX 5700 XT @ 2449/1850MHzscores getScoreFormatted in the 3DMark - Time Spy benchmark. Bastiaan_NLranks #null worldwide and #1 in the hardware class. Find out more at HWBOT.
HWBOT.ORG

The Radeon RX 5700 XT @ 2443/1850MHzscores getScoreFormatted in the 3DMark - Wild Life Extreme benchmark. Bastiaan_NLranks #null worldwide and #2 in the hardware class. Find out more at HWBOT.

 

carddice.thumb.jpg.7c390489c9171fd0e6f6a639c977a943.jpgsystemdice.thumb.jpg.986b3bea51f2596f6c8cfb5d6ec8dfa7.jpg

  • Thanks 1
  • Respect 5
Link to comment
Share on other sites

  On 27/08/2023 at 13:07, Bastiaan_NL said:

This weekend I've been playing with dry ice on an MSI RX5700XT.
It was my first time with dice and running a GPU sub ambient (the previous attempts with the cascade didn't go so well). It was fun and I learned a few things at the same time, for instance: don't put too much dice and acetone in the pot or it will boil over the edge and make the GPU stop working 😂
I managed to take back my gold in TimeSpy (for now) and get a second place in WildLife Extreme for the team competition.
Near the end of todays run the pot started leaking, acetone is dirty stuff and makes its way through threads sealed with Loctite. The shop towel protecting the motherboard was getting wet from Acetone, not ideal.
Anyways, here are a few pictures, a YouTube video and a few links to submissions:

 

HWBOT.ORG

The Radeon RX 5700 XT @ 2449/1850MHzscores getScoreFormatted in the 3DMark - Time Spy benchmark. Bastiaan_NLranks #null worldwide and #1 in the hardware class. Find out more at HWBOT.
HWBOT.ORG

The Radeon RX 5700 XT @ 2443/1850MHzscores getScoreFormatted in the 3DMark - Wild Life Extreme benchmark. Bastiaan_NLranks #null worldwide and #2 in the hardware class. Find out more at HWBOT.

 

carddice.thumb.jpg.7c390489c9171fd0e6f6a639c977a943.jpgsystemdice.thumb.jpg.986b3bea51f2596f6c8cfb5d6ec8dfa7.jpg

Expand  

That is a sweet bench setup bud, thanks again for all the great submissions:)

  • Respect 2

£3000

Owned

 Share

CPU: AMD Ryzen 9 7950X3D
MOTHERBOARD: MSI Meg Ace X670E
RAM: Corsair Dominator Titanium 64GB (6000MT/s)
GPU: EVGA 3090 FTW Ultra Gaming
SSD/NVME: Corsair MP700 Pro SE Gen 5 4TB
PSU: EVGA Supernova T2 1600Watt
CASE: be quiet Dark Base Pro 900 Rev 2
FANS: Noctua NF-A14 industrialPPC x 6
Full Rig Info

Link to comment
Share on other sites

  On 27/08/2023 at 14:20, Avacado said:

More of this please.

Expand  

Amen to that! 

  • Respect 2

null

Owned

 Share

CPU: Intel Core i9-14900KS
MOTHERBOARD: ASUSTeK ROG Maximum Z790 Apex
RAM: G.SKILL Trident Z5 48GB DDR5 @ 8600 - On Water
GPU: MSI RTX 4090 Suprim-X + Byski Block
PSU: Thermaltake Toughpower GF3 1650W
SSD/NVME: NVMe x9, SATA SSD x1, HDD x1
CPU COOLER: MO-RA 360, D5 x4, 5 Gal Reservoir, Hailea HC-500A
CASE: Lian Li O11 Dynamic XL EVO
Full Rig Info
Link to comment
Share on other sites

Premium Platinum - Lifetime

Thanks guys 🙂
I really hope I can do this more often, now I need an LN2 sponsor for the next event 🤔

 

  On 27/08/2023 at 14:33, ENTERPRISE said:

That is a sweet bench setup bud, thanks again for all the great submissions:)

Expand  

Thanks, this once was my F@H frame and is now enjoying life as the bench frame.
It is really enjoyable to work with this setup, being able to walk around makes it even better!

  • Thanks 1
  • Respect 3
Link to comment
Share on other sites

Looking good man. I know if I were doing all that the results would be much more catastrophic 😂

 

Also... I can't see diamond plate without thinking of the danger to manifold scene from F&F

https://youtube.com/clip/UgkxAAwrr7lH0Q3-s7enRRf1jwxzn8ZV51G9?si=NDp2XYT0YEEtB0d8

  • Respect 1

Owned

 Share

CPU: 5900X + Optimus block
MOTHERBOARD: MSI X570 Ace
GPU: EVGA RTX 3090 FTW3 Ultra + Optimus block
RAM: 32GB Oloy Blade 3600CL14
SSD/NVME: 1TB SN750 Black
SSD/NVME 2: 1TB SN750 Black
SSD/NVME 3: 2TB Samsung 970 Evo Plus
CASE: LD PC-V7
Full Rig Info
Link to comment
Share on other sites

Premium Platinum - Lifetime
  On 28/08/2023 at 13:18, Fluxmaven said:

Looking good man. I know if I were doing all that the results would be much more catastrophic 😂

 

Also... I can't see diamond plate without thinking of the danger to manifold scene from F&F

https://youtube.com/clip/UgkxAAwrr7lH0Q3-s7enRRf1jwxzn8ZV51G9?si=NDp2XYT0YEEtB0d8

Expand  

Thanks bud 🙂
Yeah, my first advice would be to stay sober during sessions like this 😂
The preparation is key and takes 90% of the time, but it's easy to mess things up and I'm glad I didn't. I bet if I do this more often things will go smoother, less figuring out and more fun.

Regarding the diamond plate, if you would be in my line of work I bet you would have a lot of F&F flashbacks. Most of the enginerooms are covered in diamond plates 😄 

Link to comment
Share on other sites

Folding@Home Staff - Team Lead

Looking frosty ❄️

  • Respect 1

Owned

 Share

CPU: Ryzen 7 5800X
MOTHERBOARD: B550 PG Velocita
RAM: 4x8GB Ballistix
GPU: RX 6900 XT
PSU: LEADEX V Platinum 1KW
CASE: QUBE 500
SSD/NVME: T-FORCE CARDEA A440 PRO
OPERATING SYSTEM: 11 Pro
Full Rig Info
Link to comment
Share on other sites

  • 2 months later...
Premium Platinum - Lifetime

A 'little' update:
Friday I received some dry ice again to run hardware subzero for fun, and for the Country Cup. 
As the first victim, we had the RX5700XT again for Unigine Superposition 1080P Extreme which was limited to RDNA 1.0. Why am I saying we? Because @server075 and @kaliz were on stream almost all the time, supporting me with all the info I needed, taking screenshots from the stream and keeping me motivated (all the way through the night). Thanks again boys, good times! 🍻
Lucky for me, the card was already in 'cold trim' and had some additional mods to help her do a little better. Sadly I didn't get my flexible heaters in time, which are needed instead of a normal heater because I moved a few capacitors to the back of the PCB to make clearance for the GPU pot. Anyways, here are some pictures and the result (one of them 🤫 )
 

HWBOT.ORG

The Radeon RX 5700 XT @ 2450/1825MHzscores getScoreFormatted in the Unigine Superposition - 1080P Xtreme benchmark. Bastiaan_NLranks #null worldwide and #1 in the hardware class. Find...

 

image.thumb.png.5d4c6cd5faaf5c54f879e79e8743ff87.png

I added more insulation to the back of the card to reduce the risk of it causing shorts. Up and running, testing Superposition:
image.thumb.png.c76c314f33323d527bee1589741ac0fe.png

image.thumb.png.0b111c3afaac1d975663e15c4168dd29.png

And one of the screenshots from @server075:
image.thumb.png.dd2f008ea963e59bd88315a3955b8f7b.png
 

Onto the next subject, an AMD 4300G. This one was the most fun we had, as it ran full pot (constant -76°C) for almost 5 hours until I decided to quit. The hardware itself was totally happy, besides the ASRock x570 Taichi being a bit weird with a lot of missing settings. The main reason for choosing this hardware is that this was a fitting CPU for another part of the Country Cup. 
The setup, figuring out some settings on the fly as it was a sort of last minute decision to switch and prep this board. 
 

HWBOT.ORG

The Ryzen 3 4300G @ 5100MHzscores getScoreFormatted in the 3DMark - Time Spy Extreme (CPU) benchmark. Bastiaan_NLranks #19 worldwide and #1 in the hardware class. Find out more at HWBOT.


Due to the mass of the pot, and the minimal dissipated heat from a cute 4 core CPU it would run just fine without any dry ice in the pot. It would only heat up about one degree with the benchmark running at any subzero temperature we tested, and because it was totally new to me we did steps of about 10 degrees. Starting at -20°C all the way to hours of full pot fun.
image.thumb.png.83782f6ad1b767d8f6f939ecf931c81b.png

And this is what it looks like after many hours of benching:
image.thumb.png.16961bf077dc72b72521089cae4ed3c4.png

For the final kilo's of dry ice I decided to ask @L0wPull if I could sacrifice the ASUS B650E-I Gaming Wifi motherboard that I bought from him for a prior competition with the 'guarantee' of him buying it back soon after.
He told me to go for it, but I would have to keep it... Why not? 😂
The CPU for this one was an AMD 7700X and a kit of G.Skill A-Die, with some pretty good results!
 

HWBOT.ORG

The Ryzen 7 7700X @ 6350.1MHzscores getScoreFormatted in the GPUPI for CPU - 1B benchmark. Bastiaan_NLranks #5 worldwide and #5 in the hardware class. Find out more at HWBOT.


Preparation of the hardware:
image.thumb.png.e605be95ef87c5b2738f03922d9214a3.png 

 

Cooled down:
image.thumb.png.608c4dec8406f4610878336da1bc9c6d.png

After a few hours of fun:
image.thumb.png.d444c696285ddfb634278b3c492571ce.png

I just love it how this MASSIVE Kingpin Trex Rev 3 makes the board almost dissapear. With the pretty GT1030 from Galax which @L0wPull found for me it's one of the funniest looking bench setups I had so far.
If you made it to this point, I thank you for your interest 🙂
Also thanks to all the guys who took the time to join the stream for a little entertainment, you know who you are. Love you all!

Edited by Bastiaan_NL
  • Thanks 1
  • Respect 9
Link to comment
Share on other sites

Looks like you had a good time, bro. Cool stuff (pun intended).

  • Respect 1

null

Owned

 Share

CPU: Intel Core i9-14900KS
MOTHERBOARD: ASUSTeK ROG Maximum Z790 Apex
RAM: G.SKILL Trident Z5 48GB DDR5 @ 8600 - On Water
GPU: MSI RTX 4090 Suprim-X + Byski Block
PSU: Thermaltake Toughpower GF3 1650W
SSD/NVME: NVMe x9, SATA SSD x1, HDD x1
CPU COOLER: MO-RA 360, D5 x4, 5 Gal Reservoir, Hailea HC-500A
CASE: Lian Li O11 Dynamic XL EVO
Full Rig Info
Link to comment
Share on other sites

Premium Platinum - Lifetime
  On 06/11/2023 at 08:15, Mr. Fox said:

Looks like you had a good time, bro. Cool stuff (pun intended).

Expand  

Thanks Fox, it was a real good time!
And yeah, it's real cool stuff! I can't wait to start playing with LN2... For now -102°C is the most extreme I've done 🙂

  • Respect 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy