2022 Team Cup!

[N2 Gaming]

I might have a pair of GTX 460 cards for the gt 400 series in SLI I could submit with the Ph ii x4 955 BE  I'll have to look.  Can't remember what hardware I have laying around.

Edited September 22, 2022 by N2 Gaming

[Avacado]

8 hours ago, N2 Gaming said:

I might have a pair of GTX 460 cards for the gt 400 series in SLI I could submit with the Ph ii x4 955 BE  I'll have to look.  Can't remember what hardware I have laying around.

[Bastiaan_NL]

I remember saying to @Avacado that 2 GPU's was the max I would get for the competition....

 

 

@Fluxmaven when is that AA meeting again?

[Avacado]

29 minutes ago, Bastiaan_NL said:

I remember saying to @Avacado that 2 GPU's was the max I would get for the competition....

 

 

@Fluxmaven when is that AA meeting again?

I think you got me beat with GPU's this time. I already had a ton of DDR3 and 2. I got you beat on everything else though. I'll have to take a pic this weekend. We do have a problem for sure my friend. I love that you managed to get boxes for all your MOBO's, I was not so fortunate. 

Edited September 22, 2022 by Avacado

[Bastiaan_NL]

Sadly only two of those boxes are the originals, the others are just there to put the motherboards on something solid. 
When looking at your stream I noticed all the motherboards, you win for sure

[EHW Ai]

@Bastiaan_NLdon't mind that green fruit; he suffers from ocd (unlike you and me, myself, and HAL 9000). 

 

also, been less than busy lately coz a buddy of mine lost his dad (who was a little younger than me), who was also his Rock of Gibraltar; hence, there's been a lot of introspection this past week at my end. i do still plan on completing the 2080ti run before time's up though. 

 

just need to get out and pick up six gallons of distilled.

Edited September 22, 2022 by iamjanco

[N2 Gaming]

13 hours ago, Avacado said:

While cleaning the dust off of a never used in my possession GTX 460 1GB Hawk Twin Frozer GPU, the dark side managed to make me break 5 fan blades off one of the two fans

 

I'm performing the Super Glue surgery atm.  Hopefully the card is good after all this.  I'd hate to plug it in to find a DOA card after doing the cleaning and fan surgery.  I need little Yoda's power right about now.

Edited September 23, 2022 by N2 Gaming

[The Pook]

7 minutes ago, N2 Gaming said:

While cleaning the dust off of a never used in my possession GTX 460 1GB Hawk Twin Frozer GPU, the dark side managed to make me break 5 fan blades off one of the two fans

 

I'm performing the Super Glue surgery atm.  Hopefully the card is good after all this.  I'd hate to plug it in to find a DOA card after doing the cleaning and fan surgery.  I need little Yoda's power right about now.

 

why not just de-shroud and zip tie on a couple of (better) fans onto it? 

[N2 Gaming]

10 minutes ago, The Pook said:

 

why not just de-shroud and zip tie on a couple of (better) fans onto it? 

I don't think that way LOL.  Come to think of it, that's not a bad idea if I had a couple of better fans laying around.  Not about to go hosing other hardware for this one LOL

 

Edit:  Super glue is drying.  The glue should not throw the fan out of balance too much.

Edited September 23, 2022 by N2 Gaming

[N2 Gaming]

Success (")

 

CPUZ Validation

  

[url=https://valid.x86.fr/x4nlb0][img]https://valid.x86.fr/cache/banner/x4nlb0-6.png[/img][/url]

 

Now to figure out how to tweek things and get some validations.

 

Edit:  I tried to get the CPUZ link to work a couple of diff ways but alas I give up.  Other things to do besides figuring out how to post links

Edited September 23, 2022 by N2 Gaming

[pio]

We need at least a 7970 x2 run (with AM3+ platform), or probably preferred a RX480, RX570, RX470, 290(x), depending on what cards anyone may have laying around crossfire run.  Something strong dual GPU GDDR5 on AM3+, and AMD GPU's that's NOT RX 590's or RX 580's.

 

/img/logo.png

Overclocking, overclocking, and much more! Like overclocking.

HWBOT.ORG

---

HWBOT is a site dedicated to overclocking. We promote overclocking achievements and competitions for professionals as well as...

 

Any takers?  @Fluxmaven  I don't know who else would have an AM3+ setup and GDDR5 AMD cards laying around. -_-  

 

I'd buy some RX 570's and run them myself, but I've already done the 580's.  Somehow we went from 1st in that category down to third because we only have the 2 runs.  

Edited September 23, 2022 by pioneerisloud

[Fluxmaven]

1 hour ago, pioneerisloud said:

We need at least a 7970 x2 run (with AM3+ platform), or probably preferred a RX480, RX570, RX470, 290(x), depending on what cards anyone may have laying around crossfire run.  Something strong dual GPU GDDR5 on AM3+, and AMD GPU's that's NOT RX 590's or RX 580's.

 

Any takers?  @Fluxmaven  I don't know who else would have an AM3+ setup and GDDR5 AMD cards laying around. -_-  

I literally bought the AM3+ setup so I could run my 7970s. IDK if I'll get to that this weekend. I have a 2700k + SLI 460 setup on the bench currently. 

[Bastiaan_NL]

12 hours ago, iamjanco said:

@Bastiaan_NLdon't mind that green fruit; he suffers from ocd (unlike you and me, myself, and HAL 9000). 

 

also, been less than busy lately coz a buddy of mine lost his dad (who was a little younger than me), who was also his Rock of Gibraltar; hence, there's been a lot of introspection this past week at my end. i do still plan on completing the 2080ti run before time's up though. 

 

just need to get out and pick up six gallons of distilled.

Don't worry Jan, being there for your buddy is way more important than running a 2080Ti for a benchmark. 

 

9 hours ago, N2 Gaming said:

While cleaning the dust off of a never used in my possession GTX 460 1GB Hawk Twin Frozer GPU, the dark side managed to make me break 5 fan blades off one of the two fans

 

I'm performing the Super Glue surgery atm.  Hopefully the card is good after all this.  I'd hate to plug it in to find a DOA card after doing the cleaning and fan surgery.  I need little Yoda's power right about now.

Ah that sucks man, I would do the same as @The Pook suggested. 

 

7 hours ago, N2 Gaming said:

Success (")

 

CPUZ Validation

  

https://valid.x86.fr/x4nlb0

 

Now to figure out how to tweek things and get some validations.

 

Edit:  I tried to get the CPUZ link to work a couple of diff ways but alas I give up.  Other things to do besides figuring out how to post links

You can just post the link here like I fixed in the quote above and it'll work just fine

 

4 hours ago, Fluxmaven said:

I literally bought the AM3+ setup so I could run my 7970s. IDK if I'll get to that this weekend. I have a 2700k + SLI 460 setup on the bench currently. 

No pressure, but it would be nice to have that result on the board too

 

We are in 5th now, proud of y'all

Edited September 23, 2022 by Bastiaan_NL

[Fluxmaven]

So I tore the place apart looking for a damn SLI bridge that would fit... Could not find any of the little single row ribbon ones. Tried some redneck engineering with no success.... So looks like I'm doing the GTX 460's next weekend while I wait for a bridge and running the 7970s

 

[pio]

3 hours ago, Fluxmaven said:

So I tore the place apart looking for a damn SLI bridge that would fit... Could not find any of the little single row ribbon ones. Tried some redneck engineering with no success.... So looks like I'm doing the GTX 460's next weekend while I wait for a bridge and running the 7970s

 

Good plan.

 

5.4GHz+ on the FX and 1300+ on the 7970's should do nicely, assuming you can squeeze that much out of everything.

 

Let's see if we can get enough people and junk running to get 4th place!

[N2 Gaming]

I found an EVGA GT or GTX285 yesterday while looking for some hardware.

[N2 Gaming]

Ok I got the two gtx460's running in SLI but I can see little to no usage on the second gpu while monitoring them in Afterburner as well as in Heaven.  I get the same score in sli or non sli mode   Don't know what's going on.

 

 

[tictoc]

I might join in.  I'll take a look through the thread and see what we need to run.  Off the top of my head, I think I could do Quad 7970s or Dual on some wickedly high clocking 290s.

 

I'll mess around with a stripped down Windows 7 install tonight, and then see what I can get up and running over the next week.

[Avacado]

3 hours ago, tictoc said:

I might join in.  I'll take a look through the thread and see what we need to run.  Off the top of my head, I think I could do Quad 7970s or Dual on some wickedly high clocking 290s.

 

I'll mess around with a stripped down Windows 7 install tonight, and then see what I can get up and running over the next week.

Was wondering if/when you'd join us. We really need the help, thank you!

[Fluxmaven]

6 hours ago, N2 Gaming said:

Ok I got the two gtx460's running in SLI but I can see little to no usage on the second gpu while monitoring them in Afterburner as well as in Heaven.  I get the same score in sli or non sli mode   Don't know what's going on.

I also have a pair of GTX 460's that I plan on running so it will be a battle to see who can actually get SLI working correctly 

[Bastiaan_NL]

11 hours ago, N2 Gaming said:

Ok I got the two gtx460's running in SLI but I can see little to no usage on the second gpu while monitoring them in Afterburner as well as in Heaven.  I get the same score in sli or non sli mode   Don't know what's going on.

 

Stupid question, but was it showing as 'SLI enabled' in nvidia control panel? 
I had mine running pretty good on a 4770k with a bit of an overclock and it was loading both cards. If you need live help or whatever hop on discord, usually I'm there with @Avacado as much as we can so you can always ask questions there (and some other guys too). I hope you can get it working so you can battle it out with @Fluxmaven 

 

 

10 hours ago, tictoc said:

I might join in.  I'll take a look through the thread and see what we need to run.  Off the top of my head, I think I could do Quad 7970s or Dual on some wickedly high clocking 290s.

 

I'll mess around with a stripped down Windows 7 install tonight, and then see what I can get up and running over the next week.

We need you @tictoc, you can check the spreadsheet in the OP for basic info and links to the benchmarks. I bet you know how it works  

 

And that's a 1000 points

Edited September 24, 2022 by Bastiaan_NL

[Cerberus]

 

 

 

 

S754 macine finally online, had to use IDE disk drive, wasn't happening with sata.

 

AGP ATI 9000 should be here this thursday for the AMD AGP slot, hope it benches well.

[pio]

On 23/09/2022 at 18:48, tictoc said:

I might join in.  I'll take a look through the thread and see what we need to run.  Off the top of my head, I think I could do Quad 7970s or Dual on some wickedly high clocking 290s.

 

I'll mess around with a stripped down Windows 7 install tonight, and then see what I can get up and running over the next week.

If you happen to have an AM3+ setup (FX), we could REALLY use the pair of wicked high clocking 290's to join up with my RX 580's and Bastain's 590's.  Link below for the rules on that particular bench.

/img/logo.png

Overclocking, overclocking, and much more! Like overclocking.

HWBOT.ORG

---

HWBOT is a site dedicated to overclocking. We promote overclocking achievements and competitions for professionals as well as...

 

 

5 hours ago, Cerberus said:

 

 

 

 

S754 macine finally online, had to use IDE disk drive, wasn't happening with sata.

 

AGP ATI 9000 should be here this thursday for the AMD AGP slot, hope it benches well.

Ebay sells some IDE to SATA converters that'll get you going with a SSD no problem on Socket 754.   Just an example is linked below, but they're regularly under like $9 or so shipped. 

 

 

SATA to PATA IDE Hard Drive Adapter Converter 3.5" HDD Parallel to Serial ATA US

WWW.EBAY.COM

---

Converts Parallel ATA (PATA, ATA, IDE) to Serial ATA (SATA). Features one SATA port, one PATA port (40-pin IDE), and one 4-pin...

 

[Fluxmaven]

 

Notice how it was 9PM when I set out to bench this and it's now almost 5AM... Oh well end result is that we are winning this category

[Diffident]

3 hours ago, Fluxmaven said:

 

Notice how it was 9PM when I set out to bench this and it's now almost 5AM... Oh well end result is that we are winning this category

 

That poor little plant.