Show Your Car and Car Discussion Thread

[pio]

EDIT:
Sometime in the middle of the night last night, literally less than 12 hours after I put this on......some idiot decided they wanted it.  Now there's a giant ding in my tailgate and all the damn bolts are stripped.  I'm absolutely livid.  It's a piece of freaking metal that was bolted to the car, like who the...........nevermind.  I removed it tonight, its now stored in my closet till I can freaking move. -_-

-----------------------------------------------------------------

Little update on my Jeep for you guys, since I gave up long ago on build logs for cars....... 

This is all going to be sandblasted and powder coated black next spring (with all 5 of the wheels).  Electrical tape is all I could find to protect the paint on the Jeep itself, but it works for now.  Today, we finished fabbing up the brackets to mount the custom ladder on it!

 

 

 

 

 

 

Edited November 29, 2021 by pioneerisloud

[The Pook]

had a three day weekend so finally slapped on my Frankenstein bundle of parts (Koni shocks for a MK6 Jetta, Eibach Springs for a CC, and Audi TT perch bushings). 

 

before/after: 

 

 

 

needs an alignment... and tint... and wheels and/or spacers... but it was just supposed to be a daily and not a project 

Edited November 29, 2021 by The Pook

[Avacado]

6 hours ago, The Pook said:

had a three day weekend so finally slapped on my Frankenstein bundle of parts (Koni shocks for a MK6 Jetta, Eibach Springs for a CC, and Audi TT perch bushings). 

 

before/after: 

 

 

 

needs an alignment... and tint... and wheels and/or spacers... but it was just supposed to be a daily and not a project 

I always knew you drove a Maroon car. 

[The Pook]

13 hours ago, Avacado said:

I always knew you drove a Maroon car. 

 

only need 4 more 

[Alex]

Went to look at the 11th gen the other day, really nice car. Love the inside. Only downsides are the complete lack of steering feel, very touchy brakes despite having a lot of travel after the initial bite and the accelerator felt like it had 1000ms of input latency and then on a rubber band.

 

Probably going to buy one in Spring regardless, have to go CVT because my partner can't drive manual. Hopefully she can learn in my S2000 and we can trade it up for a manual one down the road though

 

 

 

 

 

 

Edited December 6, 2021 by Alex

[Supercrumpet]

Got a wee bit of snow when I took the Alltrack up to Kentucky last week.

 

[Storm-Chaser]

On 27/11/2021 at 23:13, pioneerisloud said:

EDIT:
Sometime in the middle of the night last night, literally less than 12 hours after I put this on......some idiot decided they wanted it.  Now there's a giant ding in my tailgate and all the damn bolts are stripped.  I'm absolutely livid.  It's a piece of freaking metal that was bolted to the car, like who the...........nevermind.  I removed it tonight, its now stored in my closet till I can freaking move. -_-

-----------------------------------------------------------------

Little update on my Jeep for you guys, since I gave up long ago on build logs for cars....... 

This is all going to be sandblasted and powder coated black next spring (with all 5 of the wheels).  Electrical tape is all I could find to protect the paint on the Jeep itself, but it works for now.  Today, we finished fabbing up the brackets to mount the custom ladder on it!

 

 

 

 

 

 

Looks like you are patriot in every sense of the word. props for being bold like that.

[pio]

2 hours ago, Storm-Chaser said:

Looks like you are patriot in every sense of the word. props for being bold like that.

You know what's funny? I started making it all patriotic in 2019 when I bought it. Before all this political stuff got so mainstream. I always build my cars with a theme in mind. 

[J7SC_Orion]

...had an epiphany while out in the Fraser Valley on business...

 

[The Pook]

she got baf

 

 

 

[J7SC_Orion]

...we went for a drive in the mountains Easter Sunday as the weather was nice, then an atmospheric river came along...thawing the iced hood in a parking garage so I can actually open it later. Front parking sensors were also iced over, incessantly beeping.

 

 

[Andrew]

 

That's a weird place to put a speed limit sign. Usually they're on the side of the road and much bigger. It's also weirdly specific. I would have assumed it would be 50 km/h, not 47.

[Alex]

Got myself a long reach, low profile floor jack, best part: paid cash.

 

 

 

 

 

 

Also ordered some jack stands and a 1/2" torque wrench for the wheels.

[ArchStanton]

14 minutes ago, Alex said:

1/2" torque wrench

Nice looking floor jack.  Good ones always look like more than I want to carry very far.  Genuinely curious about the quote above.  Did you possibly mean "impact wrench" instead?  Or do you intend to tighten your wheel mounting hardware to a very specific torque spec?

[J7SC_Orion]

7 hours ago, Andrew said:

 

That's a weird place to put a speed limit sign. Usually they're on the side of the road and much bigger. It's also weirdly specific. I would have assumed it would be 50 km/h, not 47.

 

Haha - best part is that sometimes, the 'electronic mother in law' gets it wrong, and like mothers in law the world over, won't admit to that fact.

[pio]

Hey, this got bumped again.  Guess I can update ya'll.  Taking my Jeep 15" wheels off, and taking those and the ladder down to a local sandblasting / powder coating place.  Am planning on having this done by end of the week hopefully.  The wheels and ladder will get blasted and powder coated satin black (ladder being a non skid powder coat in satin black).  Should have them back and on the Jeep in 4-6 weeks according to the finishing place.

[Alex]

9 hours ago, ArchStanton said:

Nice looking floor jack.  Good ones always look like more than I want to carry very far.  Genuinely curious about the quote above.  Did you possibly mean "impact wrench" instead?  Or do you intend to tighten your wheel mounting hardware to a very specific torque spec?

Yeah I wouldn't trust a (cheap) impact driver to tighten lug nuts especially if I'm taking it to the track. I need to torque the lug nuts to around 80-90lb-ft if I remember correctly, so I got this:

Amazon.ca Something Went Wrong / Quelque chose s'est mal passé

WWW.AMAZON.CA

 

[Alex]

Also got these, best part: paid cash.

 

 

https://cdn.discordapp.com/attachments/408687042474672128/970124666226245642/IMG_0471.JPG

Edited May 1, 2022 by Alex

[Alex]

  

Shifter rebuilt, replaced all the plastics and rubbers around/in it too and even more Honda urea grease slapped on (after the old one got removed). Also slapped on some Shin Etsu grease on any rubber bits and plastic clips in the center console and engine bay. All the rubber hoses and wiring got a nice coating of it.

 

 

Spoiler

Spoiler

 

 

 

Also replaced the front bumper black inner trim and rubber and put on some (Spoon lol) front radiator stays because why not, the original one was looking a bit tired. Got to clean out a bunch of sand from under it too.

 

 

Before

Spoiler

 

 

 

After

Spoiler

Edited May 1, 2022 by Alex

[bonami2]

When you buy a car and use it like an 4x4 

 

Sorry for the graphical finger sign

Edited May 3, 2022 by bonami2

[Bastiaan_NL]

Not a great way to start your day, everyone was ok though...
Glad it wasn't my own van, that one was in for repairs

[EHW Ai]

^Koedood Marine Group?

[PCSarge]

31 minutes ago, iamjanco said:

^Koedood Marine Group?

he works on large marine diesel engines for a living. we have toy cars, he has toy ships.

 

in other news, i havent got the pictures handy, but someone decided to walk up beside my car in my parents driveway and kick the drivers side mirror off the door.

 

guy was on security camera video and was reported to police. i'm now3 about to be out about $180 for a power heated mirror. sometimes cars with options bite you later on.

 

i also have a friend who is in-process on making my custom exhaust for me. my resonator is going away and im going to have a flowmaster sportsman series off the end of a straight 3 inch pipe from the bottom of the cats. gonna have a nice rumbly burble to the car when its done. and yes i know nobody does this to chrysler 4 door sedans. but im that guy.

 

if anybody needed reference, heres the car which im sure is somewhere in the thread already.

 

 

2004 chrysler sebring touring 2.7 V6 , i have a feeling once that resonator is gone and it has a more open muffler its going to make more power.

and before someone says my rear shocks are gone cause its sitting low in the back. i had 2 tool boxes 2 ratchet sets and an outboard motor in my trunk that day

Edited May 15, 2022 by PCSarge

[Bastiaan_NL]

1 hour ago, iamjanco said:

^Koedood Marine Group?

Check

[Mr. Fox]

On 15/05/2022 at 05:44, Bastiaan_NL said:

Not a great way to start your day, everyone was ok though...
Glad it wasn't my own van, that one was in for repairs

Glad you were not hurt, bro. That is the most important thing.

Man, having a crash in a Smart car is a scary thought. It did a fair amount of damage to the VM van. I can't see the front of the turdbox that rear-ended the van, but I can imagine that is it probably the end of the line for that crummy little coupe. Hammer meets nail... hammer wins. But, this is in reverse. Looks like the nail tried to drive the hammer. But, the outcome is the same. Hammer wins.

 

Edit: "Hammer wins" sounds like the conclusion of a Mortal Combat challenge, LOL.

 

Edited May 16, 2022 by Mr. Fox